Metabo MT 18 LTX BL QSL - Инструкция по эксплуатации - Страница 10

ENGLISH

en

10

If the machine is defective, remove the battery pack 

from the machine.

Transport of li-ion battery packs:

The shipping of li-ion battery pack is subject to laws 

related to the carriage of hazardous goods (UN 

3480 and UN 3481). Inform yourself of the currently 

valid specifications when shipping li-ion battery 

packs. If necessary, consult your freight forwarder. 

Certified packaging is available from Metabo. 
Only send the battery pack if the housing is intact 

and no fluid is leaking. Remove the battery pack 

from the machine for sending. Prevent the contacts 

from short-circuiting (e.g. by protecting them with 

adhesive tape).

Reducing dust exposure:

WARNING

 - Some dust created by power 

sanding, sawing, grinding, drilling, and other 

construction activities contains chemicals known to 

cause cancer, birth defects or other reproductive 

harm. Some examples of these chemicals are:

- Lead from lead-based paints,

- Crystalline silica from bricks and cement and 

other masonry products, and

- Arsenic and chromium from chemically treated 

lumber.

Your risk from these exposures varies, depending 

on how often you do this type of work. To reduce 

your exposure to these chemicals: work in a well 

ventilated area, and work with approved safety 

equipment, such as those dust masks that are 

specially designed to filter out microscopic 

particles.
This also applies to dust from other materials such 

as some timber types (like oak or beech dust), 

metals, asbestos. Other known diseases are e.g. 

allergic reactions, respiratory diseases. Do not let 

dust enter the body.
Observe the relevant guidelines and national 

regulations for your material, staff, application and 

place of application (e.g. occupational health and 

safety regulations, disposal).
Collect the particles generated at the source, avoid 

deposits in the surrounding area. 
Use suitable accessories for special work. In this 

way, fewer particles enter the environment in an 

uncontrolled manner.
Use a suitable extraction unit.
Reduce dust exposure with the following measures:

- do not direct the escaping particles and the 

exhaust air stream at yourself or nearby persons 

or on dust deposits,

- use an extraction unit and/or air purifiers,

- ensure good ventilation of the workplace and keep 

clean using a vacuum cleaner. Sweeping or 

blowing stirs up dust.

- Vacuum or wash the protective clothing. Do not 

blow, beat or brush.

See page 2.

1 LED  lights

2 Release lever

3 Slide  switch

4 Handle

5 Setting wheel for speed adjustment 

6 Button of capacity display*

7 Capacity and signal display*

8 Battery pack *

9 Battery pack release button 

10 Accessory*

11 Dust extraction*

12 Extraction adapter*

13 Depth guide*

14 Allen screw 1

15 Allen screw 2

16 Screwdriver for Allen screw*

17 Housing flange

18 Tool holder

19 Saw blade 

20 Spring pin

21 Sanding plate
*depends on features / model

Battery pack

Charge the battery pack (8) before use.
If performance diminishes, recharge the battery 

pack.
Instructions on charging the battery pack can be 

found in the operating instructions of the Metabo 

charger.
Li-Ion battery packs "Li-Power" have a capacity and 

signal indicator (7):

- Press the button (6), the LEDs indicate the charge 

level.

- If one LED is flashing, the battery pack is almost 

flat and must be recharged.

Removing and inserting the battery pack

Removing the battery pack

Press the battery pack release (9) button and 

remove the battery pack (8).
To fit

Slide in the battery back (8) until it engages .

7.1 Attach dust extraction 

(only when working 

with triangular sanding plate)

See fig. 1 and 2, page 2
- Remove the accessory.

5. Overview

6. Commissioning

7. Use