Bosch GOP 12V-28 - Инструкция по эксплуатации - Страница 15

 English | 

15

Bosch Power Tools

1 609 92A 2LW | (16.1.17)



Maintain power tools. Check for misalignment or bind-

ing of moving parts, breakage of parts and any other 

condition that may affect the power tool’s operation. If 

damaged, have the power tool repaired before use. 

Many accidents are caused by poorly maintained power 
tools.



Keep cutting tools sharp and clean. 

Properly maintained 

cutting tools with sharp cutting edges are less likely to bind 
and are easier to control.



Use the power tool, accessories and tool bits etc. in 

accordance with these instructions, taking into 

account the working conditions and the work to be per-

formed. 

Use of the power tool for operations different 

from those intended could result in a hazardous situation.

Battery tool use and care



Recharge only with the charger specified by the manu-

facturer. 

A charger that is suitable for one type of battery 

pack may create a risk of fire when used with another 
battery pack.



Use power tools only with specifically designated 

battery packs. 

Use of any other battery packs may create 

a risk of injury and fire.



When battery pack is not in use, keep it away from 

other metal objects, like paper clips, coins, keys, nails, 

screws or other small metal objects, that can make a 

connection from one terminal to another. 

Shorting the 

battery terminals together may cause burns or a fire.



Under abusive conditions, liquid may be ejected from 

the battery; avoid contact. If contact accidentally 

occurs, flush with water. If liquid contacts eyes, addi-

tionally seek medical help. 

Liquid ejected from the 

battery may cause irritation or burns.

Service



Have your power tool serviced by a qualified repair 

person using only identical replacement parts. 

This will 

ensure that the safety of the power tool is maintained.

Safety Warnings for Cordless Multi-Cutters



Hold power tool by insulated gripping surfaces, when 

performing an operation where the cutting accessory 

may contact hidden wiring. 

Cutting accessory contacting 

a “live” wire may make exposed metal parts of the power 
tool “live” and could give the operator an electric shock.



Use the machine only for dry sanding. 

Penetration of 

water into the machine increases the risk of an electric 
shock.



Caution, fire hazard! Avoid overheating the object 

being sanded as well as the sander. Always empty the 

dust collector before taking breaks. 

In unfavourable 

conditions, e. g., when sparks emit from sanding metals, 
sanding debris in the dust bag, micro filter or paper sack 
(or in the filter sack or filter of the vacuum cleaner) can 
self-ignite. Particularly when mixed with remainders of var-
nish, polyurethane or other chemical materials and when 
the sanding debris is hot after long periods of working.



Keep hands away from the sawing range. Do not reach 

under the workpiece. 

Contact with the saw blade can 

lead to injuries.



Use appropriate detectors to determine if utility lines 

are hidden in the work area or call the local utility com-

pany for assistance. 

Contact with electric lines can lead 

to fire and electric shock. Damaging a gas line can lead to 
explosion. Penetrating a water line causes property dam-
age.



When working with the machine, always hold it firmly 

with both hands and provide for a secure stance. 

The 

power tool is guided more secure with both hands.



Secure the workpiece. 

A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.



Do not open the battery. 

Danger of short-circuiting.

Protect the battery against heat, e. g., against 

continuous intense sunlight, fire, water, and 

moisture. 

Danger of explosion.



In case of damage and improper use of the battery, 

vapours may be emitted. Ventilate the area and seek 

medical help in case of complaints. 

The vapours can 

irritate the respiratory system.



Use the battery only in conjunction with your Bosch 

power tool. 

This measure alone protects the battery 

against dangerous overload.



The battery can be damaged by pointed objects such as 

nails or screwdrivers or by force applied externally. 

An 

internal short circuit can occur and the battery can burn, 
smoke, explode or overheat.



Wear protective gloves when changing application 

tools/accessories. 

Application tools/accessories become 

hot after prolonged usage.



Do not scrape wetted materials (e. g. wallpaper) or on 

moist surfaces. 

Penetration of water into the machine 

increases the risk of an electric shock.



Do not treat the surface to be worked with solvent-

containing fluids. 

Materials being warmed up by the 

scraping can cause toxic vapours to develop.



Exercise extreme caution when handling the scraper. 

The accessory is very sharp; danger of injury.

Product Description and 

Specifications

Read all safety warnings and all instruc-

tions. 

Failure to follow the warnings and in-

structions may result in electric shock, fire 
and/or serious injury.

While reading the operating instructions, unfold the graphics 
page for the machine and leave it open.

Intended Use

The machine is intended for sawing and cutting wooden mate-
rials, plastic, gypsum, non-ferrous metals and fastening ele-
ments (e. g., unhardened nails, staples). It is also suitable for 

OBJ_BUCH-2853-001.book  Page 15  Monday, January 16, 2017  1:56 PM