Радар-детекторы Crunch 2191 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

s
PROTECTION
against all radar bands
(X, K, and super wide Ka)
s
360°
LASER COVERAGE
against all laser guns
s
VG-2
signal Detection Capabilities
s
PULSE
signal Detection Capabilities
s
CITY MODE
to virtually eliminate false radar alerts
s
USER SELECTABLE
brightness and mute on/off
s
POWER
on/off and volume control wheel
s
LED-BACKLIT
text display
s
TUTORIAL MODE
to demonstrate operations
s
MEMORY
to retain previously set operational modes after power-off
s
CORDLESS POWER
connection
(
Two AA NiMH
rechargeable batteries included)
s
CORDED POWER
connection into 12-volt car lighter socket
(Power cord included)
Additional Features
Additional audio output
You can use the CRUNCH 2191 with your hands-free ear piece or
amplified speakers by connecting your ear piece or speakers to the
auxiliary audio jack of the unit. You must have an ear piece or speakers
with a 2.5mm plug.
Please note that we do not provide ear piece, speakers, or 2.5mm adapters.
Auto power-off at Battery mode
In the event that you forget to turn off the CRUNCH 2191 when you
leave your vehicle, CRUNCH 2191 has an automatic power-off feature
to conserve battery life. The CRUNCH 2191 will automatically shut off
when no signals are detected for approximately 60 minutes. An
obtrusive audio and visual warning will confirm that the auto power-off
is about to happen. You can cancel auto power-off by pressing any
button while the audio and visual warning is being displayed.
Turn off the CRUNCH 2191 whenever you leave your vehicle. Even a
weak signal can cause the CRUNCH 2191 to remain on and drain your
batteries.
Battery installation
The CRUNCH 2191 is designed to operate on two AA NiMH
rechargeable batteries. To ensure maximum performance, we advise that
you should not use other battery types.
1.Remove the battery compartment door at the bottom of
the unit when the unit is powered off.
2.Press down batteries into place, observing the polarity indication
inside the battery compartment.
3.Replace the battery compartment door.
4.Turn the unit on to verify correct battery installation.
Battery life
The CRUNCH 2191 can provide approximately 30-40 hours of
rechargeable battery life. The CRUNCH 2191 has a separate low battery
indication LED. It intermittently blinks with warning alarms from the
moment when there is about two to four hours of remaining battery life.
Charging the batteries
When the power is supplied from 12-volt DC power cord, the two AA
NiMH rechargeable batteries will be charged. During the charging
process, the battery indication LED is ‘ON’. Within about 2.5 hours, the
batteries will be fully charged and battery indication LED will be
automatically turned off.
Auto audio control
The CRUNCH 2191 has auto audio control feature. It enables to reduce sound
level after 10 seconds if the CRUNCH 2191 makes a continuous alarm.
14
15