BRAYER BR4260 - Инструкция по эксплуатации - Страница 11

11

EN

• 

Install the right part of the round brush (21) back to 

its place, press on the clamp (20) to fix the round 

brush (21) (pic. 7).

• 

Make sure that the round brush (21) is fixed properly.

Cleaning the vacuum cleaner body

• 

Wipe the vacuum cleaner body with a soft, slightly 

damp cloth and then wipe it dry.

•  Never immerse the vacuum cleaner body, the electric 

brush (15) and the power adapter (22) into water or 

other liquids. Make sure that no liquid gets inside the 

vacuum cleaner body and the electric brush (15).

•  Do not use solvents or abrasives for cleaning the 

vacuum cleaner body and the removable parts.

STORAGE

• 

Before taking the vacuum cleaner away for storage, 

clean the vacuum cleaner body, the dust bin and the 

electric brush (15).

•  If you are not going to use the vacuum cleaner for a 

long time, it is recommended to remove the battery 

(10). To do this, press on the clamp (9) and remove 

the battery (10).

•  Keep the vacuum cleaner in a dry cool place out of 

reach of children and disabled persons.

DISPOSING OF THE BATTERY

•  Remove the battery (10), to do this, press on the 

clamp (9) and remove the battery (10). Do not 

discard the battery (10) with usual household waste; 

apply to the specialized center for further recycling.

Troubles and troubleshooting

Problem

Reasons

Solution

The vacuum cleaner 

cannot be switched on.

The battery is fully 

discharged.

Charge the battery.

The suction power 

decreased.

The dust bin is full.

The filter block is dirty.

The extension pipe 

became obstructed.
The round brush in 

the electric brush 

does not rotate.
The battery is almost 

discharged.

Clean the dust bin.

Clean the filter block.

Remove the 

obstruction from the 

extension pipe.
Clean the electric 

brush.
Fully charge the 

battery.

The indicators don’t 

light up during the 

battery charging.

No voltage in the 

socket.
The power adapter is 

disconnected from the 

mains.
The contact fault 

between the power 

adapter cord plug 

and the socket on the 

vacuum cleaner body 

occurred.

Check the mains 

socket by plugging a 

known good appliance 

to it.

Plug the power 

adapter into the mains 

socket.
Check the connection 

between the power 

adapter cord plug 

and the socket on the 

vacuum cleaner body.

Short operation time of 

the vacuum cleaner.

The battery is not fully 

charged.
Natural aging process 

of the battery.

Fully charge the 

battery.
The rechargeable 

battery is a 

consumable material. 

After the warranty 

period expires, the 

consumer should buy 

a new battery.