Ardesto MVC-C1601BN - Инструкция по эксплуатации - Страница 25

25

Clearing a Blockage

If the cleaner loses suction this may be due to clogged filters or a 

blockage.

DO NOT operate the cleaner if the suction is impaired. If you suspect a 

blockage: Switch off and unplug the cleaner immediately. Empty the 

dust, check all the filters and clean them. If this does not remove the 

blockage: Check the hose, extension tube and accessories visually and 

remove any blockage with a stick or broom handle.

When you have finished vacuuming:

•  Switch off, unplug the cleaner and rewind the power cord.

•  Empty the dust cup and clean the dust cup filter

Emptying the Dust Cup (Pic. 7-9)

Empty the dust cup vacuuming, and always after vacuuming to maintain 

efficient cleaning performance. The maximum dirt level is reached when 

the dirt reaches the MAX mark which is on the Dust Cup. You should 

empty the Dust before it reaches this level. Failure to do this will impair 

the efficiency of the cleaner.

Switch the cleaner off and unplug it. Press the dust cup release and then 

carefully remove the dust cup from the cleaner.

Invert the dust cup over a bin. Press the catch on the lid which will pop 

open. Shake and tap the dust cup lightly to remove as much dust as 

possible. Close the lid. If you wish to continue vacuuming, replace the 

cup. If you have finished vacuuming refer to the Cleaning instructions on 

the next page.