Ardesto MVC-C1601BN - Инструкция по эксплуатации - Страница 22

22

UNPACKING AND ASSEMBLY

Never attach or remove accessories when the vacuum cleaner is switched 

on.

Unpacking the Cleaner

Remove all packaging from the appliance and accessories. Retain 

the packaging. If you dispose of it, do so according to any recycling 

regulations.

Identify the cleaner components from the illustrations on the previous 

page. If any items are missing or damaged, contact your nearest store for 

assistance. Please have your receipt ready when you call.

1.  Attaching and Removing the Hose to the Cleaner (Pic.1) 

To attach the hose: Push the collar firmly into the slots in the Hose Inlet 

and check that the collar snaps into place. To remove the hose: Press 

the spring latches at the side of the collar and remove the hose. 

2.  Attaching the Hose Handle to the Extension Tube (Pic.2) 

You can use the cleaner using only the hose or with the extension 

tube fitted to the hose handle. To attach the extension tube, push the 

extension tube firmly onto the hose handle - it will fit only one way 

round. To remove the tube simply pull it off.

3.  Attaching the Floor brush (Pic.3) 

Push the Floor Brush firmly onto the end of the hose extension (or 

directly onto the hose handle if you are not using the extension tube). 

The Crevice Tool attaches to the hose in the same way as the floor 

brush.

4.  Parking and Storing the Cleaner and Attachments You can park the 

floor brush when you are not using it on the Storage Hook at the rear 

or the base of the cleaner. You can also store the cleaner with the 

extension tube connected to the floor brush which is in turn attached 

to the hook.

Carrying the cleaner

Make sure that the Dust Cup is firmly attached to the cleaner. When lifting 

and moving the cleaner always use the handle whenever Possible