Пылесос Ardesto CVC-X1011BB - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
EN
18
2. Remove hairs and other dirt that have wrapped around the
floor brush. If you do not clean the floor brush regularly, it
will become damaged and vacuum cleaner will become
unusable.
3. The rotating floor brush may be rinsed off under running
water. Make sure that it is completely dry before using it.
4. Stuck hairs can damage the device or your floor. Always
remove the hairs stuck on the brushes.
CLEANING THE FLOOR BRUSH
1.
If hair found on the floor brush, press the roll brush release tab as shown
below to open the roll brush cover, and then remove the roll brush.
2.
Remove hairs and other dirt that have wrapped around the floor brush. If you
do not clean the floor brush regularly, it will become damaged and your
machine will become unusable.
3.
The rotating floor brush may be rinsed off under running water. Make sure
that it is completely dry before using it.
4.
Stuck hairs can damage the machine or your floor. Always remove the hairs
stuck on the brushes.
PROBLEM AND SOLUTION
Problem
Solution
The machine does not start up.
The battery is empty. Charge the
machine.
The machine does not vacuum.
The filters are dirty/the dust reservoir
is full.
The floor nozzle is clogged/the floor
brush is blocked.
Clean the machine as described in this
manual.
The running time of the machine is
shorter and shorter.
The machine is not sufficiently
charged. Charge the machine fully and
try again.
The battery is broken or old. Contact
the after sales service.
Stuck hairs. Remove the hairs stuck on
the brushes.
PROBLEM AND SOLUTION
Problem
Solution
The device does not start up.
The battery is empty. Charge the device.
The device does not vacuum.
The filters are dirty/the dust reservoir is full.
The floor nozzle is clogged/the floor brush
is blocked.
Clean the device as described in this
manual.
The running time of the device is shorter
and shorter.
The device is not sufficiently charged.
Charge the device fully and try again.
The battery is broken or old. Contact the
after sales service.
Stuck hairs. Remove the hairs stuck on the
brushes.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
