Ardesto CVC-X1011BB - Инструкция по эксплуатации - Страница 17

EN

17

CLEANING AND MAINTENANCE

CLEANING THE VACUUM CLEANER

Clean the vacuum cleaner with a slightly moist soft cloth. 

Dry the machine off well. Never submerge the vacuum 

cleaner in water! 

CLEANING THE DUST RESERVOIR 

1.  Press the dust reservoir unlock button to remove it from 

the vacuum cleaner.

2.  Then take the filters out of the dust reservoir. Empty the 

dust reservoir.

3.  Take part A (HEPA filter) from part B (Filter holder).

4.  Shake out the dirt from the HEPA filter, filter holder 

and dust reservoir. 

The HEPA filter must not be washed! 

The dust reservoir and filter holder can be washed 

under the tap, then dried completely.

We advise replacing the filters regularly to ensure an 

optimal operation of the device. Dirty filters will reduce 

the suction power drastically. After every cleaning, clean 

the dust reservoir and the filters to extend the life span 

of vacuum cleaner. 

CLEANING THE FLOOR BRUSH 

1.  If hair found on the floor brush, press the roll brush release 

tab as shown below to open the roll brush cover, and then 

remove the roll brush.

USE 

•

Press the on-off switch on the handle to turn the machine on. The battery 

indicator light is blue and indicates the battery level. If the battery is almost 

empty, the light will flash on and off.  

•

When you switch on the machine, the rotating floor brush will begin to 

turn. This will cause the dirt in the opening to be shifted and thereby vacuumed 

up.  

•

Press the power control to switch between turbo and normal modes.  

•

Turbo brush is equipped with a safety which will ensure that it shuts itself 

off if, for example, objects which are too large are sucked up, or if fingers become 

tangled in the floor brush. This is for personal safety and to protect the motor. To 

restart the floor brush, press 2 times the on/off button or the speed control.  

CLEANING AND MAINTENANCE 

CLEANING THE MACHINE  
Clean the machine with a slightly moist soft cloth. Dry the machine off well. Never 

submerge the machine in water!  
CLEANING THE DUST RESERVOIR  
1.

Press the dust reservoir unlock button to remove it from the vacuum cleaner.  

2.

Then take the filters out of the dust reservoir. Empty the dust reservoir.  

3.

Take part A (HEPA filter) from part B (Filter holder).  

4.  Shake out the dirt from the HEPA filter, filter holder and dust reservoir. 

The HEPA filter must not be washed! 

The dust reservoir and filter holder can be washed under the tap, then dried 

completely. 

We advise replacing the filters regularly to ensure an optimal operation of the 

machine. Dirty filters will reduce the suction power drastically. After every 

cleaning, clean the dust reservoir and the filters to extend the life span of your 

machine.