Пылесос Zelmer ZVC021P Krzys - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
10
IMPORTANT WARNINGS
Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the
product label.
The mains connection cable must not be tangled or wrapped around the product during use. Do not pull
on the connection cord in order to unplug it.
Do not use, connect or disconnect the device to the mains with your hands or feet wet. Proceed according
to the conservation and cleaning section of this manual for cleaning.
Unplug the product immediately from the mains in the event of any breakdown or damage and contact an
authorised Technical support service.
In order to prevent any risk of danger, do not open the device. Only qualified technical personnel from the
brand´s Official Technical support service may carry out repairs or procedures on the device.
Any incorrect use or improper handling of the product shall render the warranty null and void. Only an
authorised technical support service centre may carry out repairs on this product.
This appliance is designed exclusively for domestic use, in no case should be a commercial or industrial
use. In case of misuse or tampering with the product, it will be out of warranty.
Do not use the appliance to vacuum liquids (water, etc), sharp objects (pins, pins, nails, glass, etc),
incandescent objects (matches, cigarettes)
Never use the turbobrush to: Polish floors, suck (Liquids, wet or damp dust, hot ash, burning objects, such
as cigarettes, matches, sharp and hard items, such us: razors, pins, thumbtacks, pieces of glass, etc),
flour, cement, plaster, printer or photocopier toner, etc.
B&B Trends, S.L.
disclaims all liability for damages that may occur to people, animals or objects, for the
non-observance of these warnings.
PREPARING THE VACUUM CLEANER
1. Insert the suction hose in the suction hose port. It must audibly lock into place. To remove the hose,
push the two catches on the side of the suction hose and at the same time, pull it out of the suction hose
port..
2. Insert the telescopic extension tube in the handle. For better seating,
gently turn the tube back and forth in the process. If you would like to remove the telescopic tube at a later
time, simply pull it off the handle.
EN
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
