VITEK VT-1836 B/R - Инструкция по эксплуатации - Страница 8

Пылесос VITEK VT-1836 B/R - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 52
Загружаем инструкцию
background image

8

 ENGLISH

•  Clean from the dust and rubbish the net pre-

filter (22) and the main НЕРА-filter (23).

•  Wash the net pre-filter (22) and the НЕРА-filter 

(23) under the stream of slightly warm water 
(fig 11). Do not use dishwashing machine for 
washing of the filters.

•  Dry the filters (22, 23). Do not use hair-drier 

for drying of the filters (fig 11).

•  Wash the dust box container (10) and dry it 

 (fig 

12).

Assemble the dust box container:

-  

Install the net pre-filter (22) and turn it clock-
wise until it clicks.

-   Install the main НЕРА-filter (23) into the dust 

box container (10).

-  Press the holder (8) and install the dust box 

container (10) to its place, close the cover (6).

4. Removal of the inlet filter (9) (fig 13).

•  Open the cover (6), pressing the catch (7).

•  Remove the dust box container (10).

•  Remove the plastic frame with inlet filter (9) 

upwards.

•  Remove the inlet filter (9), wash it in a stream 

of warm water and dry it carefully.

•  Install the inlet filter (9) into the plastic frame 

and install it to its place.

•  Install the container (10), cloth (28) or paper 

dust box (29) and close the cover (6).

5. Removal of the outlet filter  (fig 14).

•  Press the catch downwards and remove the 

outlet filter cover (16).

•  Remove the filter (17) and wash it under the 

stream of water, dry it and install to its place.

•  Install the outlet filter cover (16).

6. Cleaning of the turbo brush

Remove the turbo brush from the telescopic 
pipe, remove the threads and hair reeled on the 
cylindrical brush.

If the cylindrical brush does not spin during the 
appliance usage:

-   Open the cover from the lower part of the tur-

bo brush and clean the propeller form hair and 
threads (fig 4).

7. Case of the vacuum cleaner

•  Clean the case with a wet cloth.

•  Do not permit liquid into the case.

•  Do not use solvents or abrasive substances for 

cleaning.

TECHNICAL CHARACTERISTICS

Power supply:  

 

220 V ~ 50 Hz

Power consumption:  

 

2000 W

Suction power:  

 

 

450 W

Dust box capacity T-BOX system:  

1,1 l

Cloth bag 3,5 l.  + 3 paper bags

Specifications subject to change without prior 
notice.

MINIMUM SERVICE LIFE - 5 YEARS

GUARANTEE

 

Details regarding guarantee conditions can be 
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt 
must be produced when making any claim under 
the terms of this guarantee.

This product conforms to the EMC-
Requirements as laid down by the 
Council Directive 89/336/EEC and to 
the Law Voltage Regulation (73/23 EEC)

1836.indd   8

1836.indd   8

30.08.2007   12:13:29

30.08.2007   12:13:29

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к VITEK VT-1836 B/R?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"