VITEK VT-1836 B/R - Инструкция по эксплуатации - Страница 6

6

10.  Do not block the inlet or the outlet by any ob-

jects.

Do not turn the appliance on if its inlet or out-
let is blocked. Watch for the filters to be free 
from dust, fuzz, hair or other rubbish that 
blocks normal air intake.

11.  Keep hair, free hanging clothes elements, 

fingers and other parts of the body away 
from the vacuum cleaner inlet.

12. Always turn the vacuum cleaner off by the 

on/off button prior to unplugging it.

13.  Be especially careful cleaning the staircase 

landings.

14.  Do not use the vacuum cleaner to pick up 

flammable or combustible liquids (gasoline, 
cleaning fluids, perfumes, etc.), or use in ar-
eas where they may be present.

15.  Do not pick up burning or smoking ciga-

rettes, matches, or hot ashes, water or other 
liquids, as well as fine dust, like plaster, con-
crete, flour or ashes. It may cause serious 
electric motor damage and such cases are 
not covered by the warranty.

16.  Do not use the vacuum cleaner if the: - dust 

box container or the container filters are not 
installed; - cloth or paper dust box is not in-
stalled.

17.  While reeling, secure the power cord with 

your hands, do not let the plug hit the floor.

KEEP THE USER MANUAL HANDY

SAFETY PRECAUTIONS

If the intake power of the vacuum cleaner sud-
denly dropped when using, turn the vacuum 
cleaner off at once and check the telescopic 
extension pipe or the flexible hose for obstruc-
tion. Turn the vacuum cleaner off, then unplug it 
– remove the obstruction and only then continue 
using it.

•  Do not use the vacuum cleaner near heated 

surfaces, ashtrays, or in the places where 
flammable or combustible liquids may be 
present.

•  Plug the appliance only with dry hands.

•  Prior to usage, pick up sharp objects from the 

floor to avoid damaging the filters.

•  Never pull the power cord to unplug. Always 

take up the plug.

VACUUM CLEANER ASSEMBLY

Fully unpack the vacuum cleaner and check it for 
damages. Before plugging the appliance, make 
sure that the power supply voltage corresponds 
to the vacuum cleaner operating voltage.

Always turn off and unplug the vacuum cleaner 
when servicing it or changing the attachment 
brushes.

1. Attaching and removing the flexible hose 

(picture 1)

Insert the tip of the flexible hose (4) into the air 
inlet, located on the front side of the vacuum 
cleaner.

Insert the flexible hose until you hear a click, 
confirming the correct attachment.

To remove the flexible hose, press the fixation 
button (5) and remove the flexible hose.

2. 

Attachment of the telescopic extension 
pipe and brushes

-   Attach the telescopic extension pipe (2) to the 

handle of the flexible hose (3) (fig 2). Press 
the holder button (fig 3) and extend the lower 
part of the telescopic extension pipe to the re-
quired length.

-   Choose the required attachment: turbo brush 

(1), crevice nozzle (24), furniture upholstery 
cleaning brush (25), small brush (26) or floor/
carpet brush (27) and attach it to the tele-
scopic extension pipe (fig 4).

Using of attachments and brushes

Floor/carpet turbo brush (1)

Turbo brush (1) can be used for cleaning of 
floors and carpets with long or short pile, ideal 
for animal hair removal from carpets. Cylindri-
cal brush with rigid bristle spins in the airflow. 
Its bristles effectively “comb” the animal hair out 
and “sweeps” the motes from the pile of the car-
pets.

Note: Do not use turbo brush for cleaning of the 
carpets with long fringes and the pile over 15 
mm to avoid damaging the carpet by the brush 
spin. Do not run the turbo brush over power 
cords and make sure to turn the vacuum cleaner 
right after use.

 ENGLISH

1836.indd   6

1836.indd   6

30.08.2007   12:13:29

30.08.2007   12:13:29