VITEK VT-1836 B/R - Инструкция по эксплуатации - Страница 7

7

       ENGLISH         

Crevice nozzle (24)

For cleaning the radiators, chinks, corners and 
sofa pillows.

Furniture upholstery cleaning brush (25)

This brush is designed to clean cloth surfaces of 
the soft furniture.

Small brush (26)

This brush is designed for the dust removal of the 
furniture surfaces. 

Pile of the brush protects the polished surfaces 
of the furniture.

Floor/carpet brush (27) (fig. 5-6)

Turn the switch on the brush to the desired posi-
tion, depending on the type of the surface to be 
cleaned.

USAGE INSTRUCTIONS

Extend the power cord to the desired length and 
plug it into the power supply socket before use. 
Yellow mark on the power cord warns of the max-
imum cord length. 

Do not extend the power cord beyond the red 
mark.

Attention:

-   Always make sure the vacuum cleaner has the 

dust box container (10) and its filters (22, 23) 
installed before turning it on.

-   when using the cloth (28) or paper (29) dust 

box, make sure it is properly installed.

1. Press the on/off button (15) to turn the vacuum 

cleaner on.

2. While using, adjust the suction power by the 

governor (14).

3. When finished using, press the on/off button 

(15) and unplug the appliance.

4. Press the reeling button (11) to reel the power 

cord and secure it by your hand to avoid its 
whipping and damage.

Usage of the cloth or paper dust box 

(fig 7)

•  Open the cover (6), pressing the catch (7).

•  Press the dust box holder (8), install the cloth 

(28) or paper dust box (29), release holder (8), 
make sure the dust box frame is firmly set.

•  Close the cover (6).

Removal of the paper or cloth dust box: 

-  open the cover (6), press the holder (8) and 

remove the dust box.

-   paper dust box (29) is disposable and is sub-

ject to utilization when full

-   cloth dust box (28) is nonexpendable. Remove 

the dust and rubbish from it by sliding the plas-
tic clamp. Then place the clamp back to its 
place.

SERVICING

1. Removing the dust box container (10) and 

cleaning it from dust and rubbish (fig 8).

•  Turn the vacuum cleaner off and unplug it

•  Press the catch (7) and open the cover (6).

•  Extract the dust box container (10), taking it by 

the handle (19).

•  Open the lower cover of the dust box container 

(21), by pressing the lock button (20).

•  Remove the dust and rubbish from the dust 

box container.

Note:

-   it is recommended to clean the dust box con-

tainer after each use of the vacuum cleaner.

-  Dust box container filling indicator (13) will 

light, reminding you to clean the container and 
filters.

2. Disassembling the dust box container 

 (fig 

9).

•  Turn the vacuum cleaner off and unplug it, re-

move the dust box container and clean it from 
the dust and rubbish, close the lower cover.

•  Remove the НЕРА-filter (23) from the dust box 

container (10).

•  Turn the net pre-filter counter-clockwise (22) 

and remove it from the dust box container.

3. Cleaning of the filters (fig 10)

Maintain the filters clean (22, 23), for they define 
the efficiency of the vacuum cleaner. Clean the 
filters at the least three, four times a year, and if 
heavily used – more often. Replace the filters as 
needed.

•  Turn the vacuum cleaner off and unplug it, re-

move the container (10) and clean it from the 
dust and rubbish, remove the filters (22, 23) 
from it.

1836.indd   7

1836.indd   7

30.08.2007   12:13:29

30.08.2007   12:13:29