VITEK VT-1830 SR - Инструкция по эксплуатации - Страница 6

6

 ENGLISH

Turn on the vacuum cleaner and continue 

• 

cleaning

.

Cleaning of the НЕРА-filter (9)

Clean the НЕРА-filter (9) as it gets dirty. 

Switch off and unplug the unit.

• 

Remove the container (10), pressing the 

• 

clamps (pic.9).
Holding the container (10), take the НЕРА-

• 

filter (9) from it.
Wash the НЕРА-filter (9) under a warm water 

• 

jet. Do not use a dish wash machine to wash 
the filter.
Dry the filters. Do not use a hairdryer to dry 

• 

the НЕРА filter (9).
Wash the container (10) and dry it.

• 

Installing the НЕРА-filter

Install the НЕРА-filter (9) into the container 

• 

(10).
Match the edge on the container (10) with the 

• 

groove on the body of the vacuum cleaner 
and insert the container until a click, which 
confirms that it is installed properly.

Body of the vacuum cleaner

W ipe the body of the vacuum cleaner with a 

• 

damp cloth.
Do not allow liquid to get inside the body of 

• 

the vacuum cleaner.

Never use solvents or abrasive cleaning 

• 

products to clean the surface of the vacuum 
cleaner.

Storage

Keep the vacuum cleaner in a dry cool place, 

• 

out of reach of children

, using the brush 

“parking” place (2) on the body of the unit.

Specifications

Power supply: 220 -240 V~ 50 Hz
Power consumption: 1600 W
Suction power: 300 W

The manufacturer preserves the right to change 
the specifications of the unit without a prelimi-
nary notification.

Service life of the unit is at least 5 years

Guarantee 

Details regarding guarantee conditions can be 
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt 
must be produced when making any claim under 
the terms of this guarantee.

This product conforms to the EMC-Re-
quirements as laid down by the Council 
Directive 89/336/EEC and to the Low 
Voltage Regulation (73/23 EEC)

VT-1830  SR.indd   6

VT-1830  SR.indd   6

02.08.2011   9:41:37

02.08.2011   9:41:37