LG CordZero A9MULTICARE - Инструкция по эксплуатации - Страница 22

22

EN

OPERATION

Getting Started

Before Using the Appliance

•

Close the dust bin cover properly before using 

the appliance. If the dust bin cover is left open, 

the suction strength may deteriorate and affect 

the cleaning performance.

•

Support the bottom of the appliance when 

cleaning an elevated surface.

•

Store the appliance in the charging station 

or place it flat on the floor when not in use. 

Leaning the appliance against a wall or chair 

can result in product damage or personal injury 

if the appliance falls.

•

Make sure that the exhaust filter or pre-filter is 

properly assembled before using the appliance.

•

Environmental conditions such as temperature 

and humidity may cause static electricity to 

accumulate on the appliance. Please contact 

LG Electronics customer information center if 

the problem persists.

•

Make sure to remove any foreign object 

such as a sock or stocking before using the 

appliance. Any foreign object on the inlet port 

or extension pipe will prevent the appliance 

from functioning properly. 

•

Please use the product at normal room 

temperatures as the battery runtime may 

deteriorate severely if used at temperatures 

lower than 5 °C or higher than 38 °C for an 

extended period of time.

•

The battery runtime is dependent on the 

surface type and the suction power.

•

Follow manufacturer’s recommendations when 

cleaning flooring, carpets, and rugs.

•

To avoid scratches on polished floors, keep the 

brushes of the nozzles and tools free from grit, 

sand, or abrasive objects.

•

Refer to the Parts and Specifications section 

for battery runtime details.

Assembling Attachments

Nozzles and tools can be attached to either the 

product body or the end of the extension pipe.

1 

Insert the fully charged battery 

a

 into the 

cavity at the bottom of the handle on the 

product body.

2 

Attach the nozzles, tools, or extension pipe 

by sliding them onto the inlet 

b

 on the body 

until they click into place. The nozzles and 

tools can also be attached to the end of the 

extension pipe 

b

.

•

Detach the accessories by pressing the 

release button 

c

.

3 

Adjust the extension pipe by pressing the 

length adjustment button 

d

 on the back of the 

pipe and sliding until it clicks into place at the 

desired length.

•

The extension pipe extends in four steps.