LG CordZero A9MULTICARE - Инструкция по эксплуатации - Страница 18

18

EN

8 

Anchor the charging station to the wall with the 

stand anchoring screw 

j

.

9 

Plug the power cord into the power outlet.

Use double-sided tape

Use double-sided tape to attach the wall anchoring 

block 

a

 to the charging station and the wall. 

•

Do not use double-sided tape on wallpaper. 

•

Remove the center section of double-sided 

tape. Attach the wall anchoring block to the 

charging station by using the tape.

•

Attach the second piece of double-sided tape 

to the other side of the wall anchoring block, 

and use it to temporarily anchor the charging 

station to the wall in the desired location.

Wall-Mounted Installation

For wall-mounted installations, the charging station 

must be attached securely to the wall using the 

provided (short) wall anchoring screws.

1 

Connect the power adapter to the port on the 

back of the charging station. 

2 

Before drilling, make sure that there are no 

pipes or electrical wires inside the wall at the 

desired location. 

3 

Hold the charging station at least 1 m from the 

floor and near enough to easily reach a power 

outlet. Mark the positions of the screw holes 

on the wall. 

4 

Drill 2 holes at the marked positions and insert 

the drywall anchor. 

•

Before drilling, make sure that there are no 

pipes or electrical wires inside the wall at 

the desired location. 

•

For drywall anchor: use 6.5 mm drill bit

•

Recommended diameter of hole: 6.5 mm

•

Recommended depth: 60 mm

•

If screwing into drywall, the drywall anchor 

should be used.

1m