LG A9MULTI2X CordZero - Инструкция по эксплуатации - Страница 14

14

 CaUTion

• 

Avoid dropping the product and parts when taking them 

out of the package. It may damage the product and/or 

cause personal injury.

• 

Do not use double-sided tape to anchor the charging 

station on papered walls. Please use the provided screws 

as otherwise the wall paper will get torn by movement 

of the charging station during the docking of the unit.

• 

We recommend anchoring the station with the 

anchoring screw.

• 

Use the anchoring screws only when the wall is made 

of concrete or is solid enough. An unsuitable wall 

can cause the mountings to weaken and cause the 

Charging station to fall causing injury and damage the 

property or product.

Please note

• 

The charging station, its pipe and support cannot 

be disassembled separately once they have been 

assembled, and the charging station has been 

attached to the wall.

• 

The charging station can be removed as needed. After 

unscrewing it from the wall, pull the station upward whilst 

the bottom of the station remains upright on the floor.

installing the wall-mount station

1

Connect the power adapter to the port on the back 

of the charging station and plug the power cord 

into the power outlet.

2

Make a hole 1 meter from the floor to insert the 

wall plug or screw anchor.

• 

Recommended diameter of hole: 

Φ

6.5; 

Recommended depth: 60 mm.

3

Anchor the station to the wall with the provided 

anchoring screws.

1 

Wall anchoring 

hole

Anchoring 

screw for wall-

mount type

Screw 

anchor

Please note

• 

A service request to change the installation location 

of the charging station will incur additional costs if 

required to do so by a qualified installer.

Uninstalling the station

Keep and charge the product on the charging station 

after separating extension pipe and nozzle from the 

product body.

 CaUTion

• 

Leaving the extension pipe and nozzle assembled for a 

long time may cause damage the product.

storage of the combination tool 

and crevice tool

Keep the combination tool and crevice tool on the 

charging station for easy access.

1

Attach the combination tool and crevice tool to the 

dedicated holders.

2

Press and hold the inlet removal button and pull 

downward to remove the combination tool or 

crevice tool.