LG A9MULTI2X CordZero - Инструкция по эксплуатации - Страница 13

13

EN

insTallaTion

installing the floor standing 

charging station

1

Put the bottom of the charging station onto the 

floor and assemble the pipe first, followed by the 

upper body mount.

 CaUTion

• 

Avoid getting your fingers stuck in any gap.

2

Connect the power adapter to the port on the back 

of the charging station and plug the power cord 

into the power outlet.

• 

The cord can be secured tidily by putting it 

through the power cord anchoring ring located 

on the back of the charging station pipe.

①

②

3

After ensuring there are no pipes or wires insider 

behind the wall, make a hole at the appropriate 

height to anchor the charging station and insert 

the screw anchor.

• 

Recommended diameter of hole: 

Φ

6.5; 

Recommended depth: 100 mm.

Screw anchor

4

Put the anchoring block on the back of the charging 

station and anchor the charging station with the 

screw.

• 

Make sure to fully tighten the screw.

Anchoring screw 

for standing type

Wall anchoring block

Screw 

anchor

when using double-sided tape (do not use 

if the wall is wallpapered)

1

Use double-sided tape to attach the wall anchoring 

block to the charging station in step 4.

• 

Be sure to remove the center part of the double-

sided tape before mounting it.

Wall anchoring block

2

Use the remaining part of the tape to anchor the 

station to the wall before inserting the screw.