Miele SGMA3 Complete C3 Comfort - Инструкция по эксплуатации - Страница 60

en

60

You now have the following options:



Press the - control before the 20
seconds have elapsed

This switches the Boost function off
and activates maximum power.



Press the + control again once the 20
seconds have elapsed

This activates the Boost function for an-
other 20 seconds. It can be activated
three times in a row. After that a pause
of one minute is required before reactiv-
ating it.

Using the Boost power level changes
the actual power consumption (see
“Notes on the European Regulation
(EU) No. 666/2013”).

Radio-control handle with Auto func-
tion

Some models also feature an Auto
function.

Auto = automatic adjustment of the
suction power according to the flooring



Do not vacuum any light materi-

als or curtains with the Auto power
setting. These may be drawn into the
vacuum cleaner and become dam-
aged.

The first time the vacuum cleaner is
switched on, the Auto power setting will
be selected automatically.
After that the vacuum cleaner will
switch on at the setting which was used
previously.



Press the + button to select a higher
suction power level.



Press the - button to select a lower
suction power level.

Opening the air inlet valve
(Fig. 29 + 30)

(not on models with LEDs or radio con-
trols on the handle, or Eco Comfort
handles)

It is easy to reduce the suction power
for a short time, e.g. to prevent rugs or
other objects being sucked into the va-
cuum cleaner.



Open the air inlet valve on the handle
far enough to reduce the suction
power.

The floorhead will be easier to man-
oeuvre.

During vacuuming



When vacuuming, pull the cleaner be-
hind you on its wheels. You can stand
it upright for vacuuming stairs and
curtains etc.

Interrupting operation (Fig. 28)

(for models with radio controls on the
handle)

The vacuum cleaner can be paused for
short breaks whilst vacuuming.



Press the Standby button 



 on the

handle.



The Standby button is designed

to pause the vacuum cleaner for
short periods of time whilst vacuum-
ing. Do not leave the vacuum cleaner
in Standby mode for long periods.
This can cause overheating and
damage.