Miele SGMA3 Complete C3 Comfort - Инструкция по эксплуатации - Страница 58

en

58

 

Curtains, fabric

 

Upholstery, cushions



Cut pile carpets, rugs and run-
ners



Energy-saving vacuuming. This
setting is also very quiet



Loop pile carpet and rugs



Hard flooring and heavily soiled
carpets and rugs

Depending on the model, your vacuum
cleaner will be fitted with the following
suction power selector:

Auto

suction power is automat-
ically adjusted for the type
of floor being vacuumed



Do not use the 

“Auto”

 setting to

vacuum lightweight materials or cur-
tains. These could be sucked in and
possibly damaged.

When using the adjustable floorhead,
if the suction seems too high, reduce
the suction power until the floorhead
is easier to manoeuvre.

Depending on the model, your vacuum
cleaner will be fitted as standard with
one of the following suction power se-
lectors.

- Footswitches

- Footswitch with the option of select-

ing interim suction power levels

- Footswitch with Boost function

- Radio-control handle

- Radio-control handle with Boost

function

Foot controls (Fig. 25)

The first time the vacuum cleaner is
switched on, the highest setting will be
selected automatically.

After that the vacuum cleaner will
switch on at the setting which was used
previously.



Press the + foot control to select a
higher setting.



Press the - foot control to select a
lower setting.

Footswitches with the option of se-
lecting interim suction power levels

Some models also offer the option of
selecting power levels in between the
standard 6 settings.

To activate this function



Press the + footswitch until the max-
imum power level has been reached.



Keep the – footswitch pressed until
the symbol for the lower power level
starts to flash.



Then release the footswitch.

You can also activate this function
from the lowest power level. To do so
press and hold the + footswitch, until
the symbol for the higher power level
starts to flash.

To select an interim power setting



Press the – or + footswitch until the
required power level has been
reached.