Metabo ASA 32 L (602013000) - Инструкция по эксплуатации - Страница 15

ENGLISH

en

15

1. Empty the container or replace the paper filter 

bag (13).

2. Clean or replace the pleated filter (11).

10.3 Replacing the pleated filter (11)

 (11)Seal the pleated filter immediately in a dust-

tight plastic bag and dispose of it in accordance with 

regulations. Fit a new pleated filter, ensuring that it 

is properly and securely positioned. See section 

6.2.

10.4 Motor protection filter

Regularly check the motor protection filter. 
Replace the motor protection filter (14) or, if appli-

cable, clean it under running water, dry it and then 

replace  

Fig. G

.

10.5 Water sensor 

Fig. H: 

Regularly clean the water sensor (15) 

(=float valve) and check for signs of damage. It 

should be possible to move the float valve slightly.

10.6 Technical inspection

At least once a year, the manufacturer or a suitably 

qualified and trained person must carry out a dust 

test, e.g. to check for damage to the filter, verify that 

the appliance is air-tight and that the control unit is 

functioning correctly.

Reduction in suction power:

See the instructions in the section on Cleaning.

• Is the pleated filter (11) dirty? Clean the 

cassettes.

• Is the paper filter bag (13) full? Replace the filter 

bag.

• Container (4) full? Empty the container.

• Nozzle, tubes or hose blocked? Clean.

Appliance will not start:

• Is the plug in the plug socket?

• No  power  from  mains?

• Mains  lead  OK?

• Has the water sensor cut off? - Empty the 

container; then switch on and off again.

• Switch (6) in "A" position? Set switch (6)to "I". 

See section 7.1.

• The vacuum cleaner is not switched on or off by 

means of a power tool, even though switch (6) is 

set to the "A" position. - Connect the power tool to 

the plug socket (7).

Do not interfere with the appliance. 

Contact an authorized workshop or 

Metabo's after-sales service department (see 

section on 13. Repairs).

f

Use only genuine Metabo accessories.

Use only accessories that fulfil the requirements 

and specifications listed in these operating instruc-

tions. 
See page 4.

A Paper filter bags

5 bags = 1 set

B Pleated filter

C Suction  hose

D Connecting  piece

E Suction tubes (2 items)

F Intermediate piece

G Suction nozzle

H Floor nozzle (metal fitting)

I Universal nozzle

J Universal  brush

K Upholstery brush

L Crevice  nozzle

M Rubber  nozzle

N Floor nozzle set (with floor piece and wet vacu-

uming piece)

O Multi-purpose nozzle

P Power tools suction set

Q Suction  hose

R Suction hose (antistatic)

S Adapter

T Suction  hose 

with connecting piece inner dia. 30 mm 

and connecting piece outer dia. 35 mm

For a complete range of accessories, see 

www.metabo.com or the catalogue.

Repairs to appliances must be carried out by quali-

fied electricians only! 
Use only original Metabo spare parts.
If you have Metabo electrical tools that require 

repairs, please contact your Metabo service centre. 

For addresses see www.metabo.com.
You can download spare parts lists from 

www.metabo.com.

To protect the environment, do not dispose of 

power tools or battery packs in household 

waste. Observe national regulations on 

separated collection and recycling of disused 

machines, packaging and accessories.

Explanatory notes on the specifications on page 2.
Changes due to technological progress reserved.
K

= Dust class As per EN 60335-2-69. 

LxBxH = External dimensions

U

= Mains voltage

F

= Mains  frequency

I

= Current  consumption

P

1

= Nominal power input

S

Ø

= Suction hose diameter

11. Troubleshooting

12. Accessories

13. Repairs

14. Environmental Protection

15. Technical specifications