Metabo ASA 32 L (602013000) - Инструкция по эксплуатации - Страница 14

ENGLISH

en

14

7.2

Power socket (7) (ASA 32 L only)

The power socket  (7) is designed for connec-

tion to a power tool only.
The total maximum permissible current 

consumption (of vacuum cleaner and 

connected unit) must not exceed the value I

max

 (see 

table, page 2).

Caution! Ensure that the power tool is 

switched off when plugging it in. Regardless of 

the switch position, the plug socket is always live 

when the mains plug is plugged in.

If the switch is  (5) in the "0" position, you can use 

the plug socket as an extension lead (e.g. for a light 

fitting).
If the  (6) switch is in the "A" position and the  (5) 

switch is in the "I" position, the vacuum cleaner can 

be activated or deactivated by a power tool 

connected to the power socket (7).

8.1 Dry Vacuuming

Vacuum using a dry filter, dry appliance and dry 

accessories only. If the cartridge is damp, dust may 

stick and form a crust. 
Always use the paper filter bag (13) with the pleated 

filter (11).

8.2 Wet vacuuming

Never operate the machine without inserting a 

pleated filter (11). The machine may be 

destroyed and water may also escape.
Vacuum without a paper filter  (13) bag. The pleated 

filter (11) is suitable for wet vacuuming.
Before carrying out any wet vacuuming, remove the 

dry vacuumed material. This process will prevent 

severe soiling and encrustation.
The float valve interrupts the suction process if the 

container is full. Switch off the motor, empty 

container and pleated filter (11), if required.
After switching off, some water may run back out of 

the hose.
Before emptying, first of all take the suction hose out 

of the liquid.
Use a dry pleated filter to carry out dry vacuuming 

afterwards. If you are frequently switching between 

dry and wet vacuuming, we recommend the use of 

a second (replacement) pleated filter. Allow the 

pleated filter, container and accessories to dry: 

otherwise dust may adhere to damp components.

8.3 Transport

Leave the hose on the machine to prevent dust from 

accidentally being released.
Wrap the suction hose about the vacuum cleaner.
Wind the mains connection lead (2) about the upper 

part, as shown.
The upper part (1) must be securely sealed to the 

container (4) - check that the snap locks  (3) are 

closed.

9.1 General Cleaning Instructions

Clean the container and accessories with water. 

Wipe the upper part (1) with a damp cloth.
Caution! This appliance contains dust that is 

harmful to health. Discharge and maintenance 

operations (including disposal of the dust collection 

containers) must only be carried out by qualified 

specialists wearing appropriate protective clothing 

and equipment.

Emptying the Container

Only permitted for dusts with 

occupational exposure limits > 1mg/m

3

. 

- unplug mains cable.

- Open the snap locks (3). Remove the upper part 

(1) from the container (4). 

- Tip out the container. 

Remove the paper filter bag.

- unplug mains cable.

- Open the snap locks (3). Remove the upper part 

(1) from the container (4). 

- Carefully remove the paper filter bag (13). Seal the 

flange of the filter bag by folding over the cover.

- Dispose of the vacuumed material in accordance 

with legal regulations.

Clean the pleated filter

- Occasionally tap the pleated filter to remove  (11) 

any dust that has gathered on it. If the filter is very 

dirty, you can clean it with water and a soft brush. 

Allow to filter to dry properly afterwards.

10.1 General Instructions

Before performing any maintenance, always 

switch off the machine and remove the mains 

plug. 

Clean the appliance (see section9.).

For maintenance by the user, the vacuum cleaner 

must be taken apart, cleaned and maintained, to the 

extent possible, without endangering maintenance 

staff or other people. 

Preventive Measures

Appropriate preventive measures include: cleaning 

the appliance before disassembly; providing local 

filtered forced ventilation where the vacuum cleaner 

is disassembled; cleaning of the maintenance area 

and providing suitable personal protective clothing 

and equipment.
When carrying out maintenance or repairs, it is 

essential to dispose of any contaminated objects 

that cannot be adequately cleaned. These objects 

must be disposed of using impermeable bags and 

in accordance with the applicable regulations for 

removing such waste.

10.2 Reduction in suction power

If the suction power decreases, carry out the 

following steps:

8. Use

9. Cleaning

10. Maintenance