JIMMY JV85 Pro - Инструкция по эксплуатации - Страница 8

6

Charging of vacuum cleaner

When the vacuum cleaner power is insufficient, 
charge the vacuum cleaner in time ; When the 
voltage is too low,to protect the battery, vacuum 
cleaner will be automatic power-off,at this time 
the vacuum cleaner need to be charged.When 
charging, plug the charger connector into the A/C 
power socket,hang the handheld vacuum cleaner 
on the holder to start charging.When the handheld 
vacuum cleaner LED display shows an increase 
in power, it indicates that the vacuum cleaner 
is charging. When charging is completed, LED 
display show 100% power.

After charging, please pull the charger plug off power 
socket and stop charging.

Attention: if power cord is damaged, to avoid danger, it must 

be replaced by a professional people of the manufacturer, 
repair ing agent or similar department.

Use of Handheld Vacuum Cleaner

Take the vacuum cleaner off the holder, press the 
switch button on the handle to start or stop of the 
vacuum cleaner. When machine is turned on, it 
works in normal power mode, press the power 
button to switch to turbo or max power mode.

Use of Flexible Metal Tube
The flexible metal tube has two modes: vertical 
and bending. The vertical mode is equivalent to the 
normal metal tube. The bending mode can be used 
for cleaning under the tablebottom,bed bottom, 
etc. When the bending mode i sneeded,press the 
bending button as shown in the following figure, 
and the metal tube can achieve 0-90°bending 
angle.

Use of  Electric Floor Head
Clean hardfloor, tile or carpet with the electric 
floorhead. Carpet brushroll can be replaced to the 
floorhead to clean long hair carpet.

Battery pack
release button

Switch button

Power button  

LED screen  

Dust release button

Bend button ing

Carpet brushroll

Clean hardfloor, tile 

or short hair carpet.

C l e a n   l o n g   h a i r 

carpet.

6

8

9

10

7