Dreame Wet and Dry Cleaner H11 White (VWV7) - Инструкция по эксплуатации - Страница 22

17

EN

FAQ

Error

Possible Cause

Solution

The vacuum 

does not work.

The handle assembly has not 

been installed in place.

Reinstall the handle 

assembly.

The vacuum is out of battery or 

low on power.

Fully charge the vacuum, 

then continue to use it.

The vacuum is upright.

Recline the vacuum.

The roller brush has not been 

installed in place, or the roller 

brush is stuck.

Reinstall or clean the roller 

brush.

The dirty water tank has not 

been installed in place.

Reinstall the dirty water 

tank.

The dirty water tank is full.

Empty the dirty water tank.

Weak suction 

force.

The filter is clogged.

Clean the filter.

The roller brush cover, filter, 

and clean water tank have not 

been installed in place.

Make sure the parts have 

been installed in place 

before use.

The roller brush is entangled 

by hairs.

Refer to the maintenance 

manual [Clean the Roller 

Brush] section.

There are some foreign objects 

in the tube or the tube is 

blocked.

Clean the tube.

The motor 

is making a 

strange noise.

Too much dirty water in the 

dirty water tank.

Empty the dirty water tank.

The main suction opening is 

blocked.

Clear any blockage in the 

main suction opening.

The battery 

status indicator 

does not light up 

while charging.

The power adapter is not 

plugged into the electrical 

outlet.

Make sure the power 

adapter is plugged in 

properly.

The power adapter is not 

connected to the charging 

base properly.

Make sure they are 

connected properly.