Dreame Wet and Dry Cleaner H11 White (VWV7) - Инструкция по эксплуатации - Страница 17

12

EN

Care & Maintenance

One-Click Self-Cleaning

1. Place the vacuum upright on the charging base after designated cleanups and make 

sure the clean water tank is full.

2. 

Press the self-cleaning button on the top of the handle briefly, the self-cleaning 

indicator lights up on the screen and the self-cleaning starts.

3. 

The vacuum will continue to recharge after the self-cleaning is finished.

* The self-cleaning function can be enabled only when the vacuum is charged and the 

battery level is more than 10%.

Tips:

1. 

Make sure the vacuum is unplugged in and not working.

2. Parts need to be replaced if necessary. Please use the parts designated by the original 

factory to avoid damage to the product due to unsuitability.

3. If the vacuum is not used for an extended period, fully charge it, unplug its charger, 

and store it in a cool, low-humidity environment away from direct sunlight. To avoid 

over-discharge of the battery, recharge the vacuum at least once every 3 months.

Note: 

•  If the deep self-cleaning is needed, press and hold the   button to activate the deep 

self-cleaning function. Please fill the clean water tank and empty the dirty water tank 

before activation, and this function can be activated only when the vacuum is charged 

and the battery level is more than 30%.

• 

After self-cleaning is completed, clean the dirty water tank in time. If there are residual 

stains on the base, please clean up the base in time.