Dreame T20 - Инструкция по эксплуатации - Страница 7

10

11

How to Use

Working Methods

Method 1: Discontinuous Cleaning Mode

Press and hold the switch of the vacuum cleaner to start working, and release it to stop 

immediately.

Method 2: Continuous Cleaning Mode (Electronic Lock)

Click the electronic lock key to switch to Continuous Cleaning mode, and then briefly press 

the on/off switch to make the vacuum cleaner in Continuous Cleaning mode.
Use the electronic lock to free your fingers and avoid finger fatigue caused by holding the 

switch.

Note:

•  In this mode, briefly press the on/off switch to suspend the operation or start again，

and the working mode of the vacuum cleaner will not change.

•  Click the electronic lock again to quit the Continuous Cleaning mode.

Continuous 

Cleaning Mode

There are two working methods for the vacuum cleaner, which can be selected based on 

your needs.

Using Different Attachments

Smart Multi-brush Bar

For cleaning floors such as marble, tile, 

and short pile carpet. When Auto mode 

is activated, the vacuum cleaner can 

automatically adjust its suction level 

depending on the surface type.

Mini Electric Brush

For vacuuming dirt, pet hair, and other 

stubborn debris from sofas, bedding, and 

other fabric surfaces.

2-in-1 Brush Nozzle

For vacuuming curtains, keyboards, 

ceilings, sofas, vehicle interiors, coffee 

tables, etc.

Crevice Nozzle

Suitable for vacuuming cracks, corners of 

doors and windows, stairs, and other hard-

to-reach places.

Note: The smart multi-brush bar can be 

attached directly to the vacuum cleaner.

Note: It is not recommended to vacuum on 

the fragile surfaces, such as silk.

缩放8%，旋转-5

How to Use