Dreame T20 - Инструкция по эксплуатации - Страница 4

4

5

Product Overview

Accessories

Extension Rod

Charger

Crevice Nozzle

Extension Hose

2-in-1 Brush Nozzle

Smart Multi-brush Bar

Mini Electric Brush

2-in-1 Charging & 

Storage Mount

 (Including screws ×2, wall plugs 

×2, mounting template sticker )

Note: The illustrations in this manual are indicative only. The actual product may differ.

Introduction of Display Screen

Electronic Lock/Reset Filter

•  Press briefly to enter/exit lock
•  Press and hold for 1.5 seconds to 

enter the filter reset interface

Suction Level Status

Lock Status

Switching Suction Level

•  Press briefly to switch the suction 

levels

Setting Language

Switching Suction Level

Note: If the vacuum cleaner cannot work normally, the display will show an error message. 

Please refer to the troubleshooting part to find your solution.

Note: The display screen will turn to the main page if there is no operation for more than 15 

seconds.

Note: 

•  Stop the vacuum cleaner at any time while cleaning. Then it will continue to use the last 

selected suction level when started again. 

•  Connecting the smart multi-brush bar to the vacuum cleaner will activate the Auto 

Mode. In this mode, the vacuum cleaner can automatically adjust its suction level 

depending on the surface type.

Press and hold the button        for 3 seconds to open the language list, then press the button                  
          to scroll through the language to select the desired one. Press and hold the button       
for 3 seconds to use the selected language.

Press the button          to switch between three suction levels of eco, med/auto, and turbo. 
The corresponding suction level will be highlighted on the display screen.
Only when using the smart multi-brush bar, the auto mode will be activated and the 
notification of "Auto" will appear on the display screen. The vacuum cleaner will then 
automatically switch the suction level between the floor/tile and the carpet.

Product Overview