Пылесос Bosch Serie | 6 ProPower BGL6POW1 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Cleaning and servicing
en
19
Cleaning the appliance
Requirement:
The appliance is
switched off.
→
"Switching off the appliance",
1.
Clean the appliance and the ac-
cessory with a soft cloth and a
commercially available plastic
cleaner.
2.
Clean the infrared receiver located
on the On/Off switch.
Cleaning the Remote-Power-
Control handle
Tip:
Clean the infrared transmitter on
the Remote-Power-Control handle
regularly. A dirty Remote-Power-Con-
trol handle can lead to faults during
operation.
▶
Clean the Remote-Power-Control
handle with a soft cloth and a com-
mercially available plastic cleaner.
Opening the lid
Requirement:
The appliance is
switched off.
→
"Switching off the appliance",
1.
Open the lid.
→ Fig.
2.
Fold up the lid completely.
Closing the lid
Tip:
Check that the dust bag is not
trapped between the lid and the ap-
pliance.
Requirements
¡
The dust bag has been inserted.
¡
The motor protection filter has
been inserted.
¡
The exhaust filter has been inser-
ted.
▶
Close the lid and lock it in place.
Cleaning the dust compartment
Requirement:
The dust bag has
been removed.
→
▶
If required, vacuum the dust com-
partment using a second appli-
ance or clean it with a dry duster
or dusting brush.
a
The dust compartment has been
cleaned.
Changing the dust bag
If the inspection window of the filter
change indicator lights up continu-
ously when the nozzle is raised and
at the highest power level, change
the dust bag.
Requirement:
The lid is open.
1.
To close the dust bag, pull the
locking tab.
→ Fig.
2.
Remove the full dust bag from the
holder.
3.
Dispose of the full dust bag.
4.
Push the new dust bag into the
holder until it clicks into place.
‒
Do not kink the dust bag.
5.
Cleaning the motor protection
filter
Tip:
To achieve the best possible va-
cuuming results, tap out or wash the
motor protection filter regularly. After
vacuuming fine dust particles, clean
or replace the motor protection filter
in order to guarantee the appliance's
suction.
