Пылесос Bosch Serie | 6 ProPower BGL6POW1 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
en
Basic operation
16
2.
Insert the hose adapter into the air-
intake opening in the lid and lock it
in place.
→ Fig.
3.
Connect the handle to the tele-
scopic tube.
→ Fig.
4.
Connect the telescopic tube to the
floor nozzle.
→ Fig.
5.
Place the accessory support
1
onto
the telescopic tube.
→ Fig.
6.
Place the crevice nozzle
1
from the
bottom onto the accessory support
1
.
7.
Place the brush ring
1
onto the up-
holstery nozzle
1
.
8.
Place the upholstery nozzle
1
with
the brush ring
1
from above onto
the accessory holder
1
.
Inserting the batteries
▶
Insert the batteries into the Re-
mote-Power-Control handle.
→
Basic operation
Basic operation
You can find out everything you need
to know about operating your appli-
ance here.
Setting the telescopic tube
1.
Unlock the telescopic tube.
2.
Set the required length of the tele-
scopic tube.
→ Fig.
Switching on the appliance
1.
Hold the mains plug and pull it out
to the required length.
2.
Insert the mains plug into the
socket.
3.
Press .
→ Fig.
a
The status display pulses white.
a
The appliance is in standby mode.
Note:
Risk of damage to the appli-
ance caused by being in standby
mode for too long. If you want to stop
vacuuming for a longer period of
time, switch off the appliance.
Switching off the appliance
1.
Press .
a
The status display goes out and
quickly flashes white three times
after a short time.
a
The appliance switches off. Any
functions currently in progress are
cancelled.
2.
Unplug the mains plug.
3.
Briefly pull on the mains power
supply cord and then let go.
a
The power cord retracts automatic-
ally.
Starting vacuuming
Requirement:
The appliance is in
standby mode.
→
▶
Press .
→ Fig.
a
The status display lights up white.
a
The appliance starts at the highest
power level.
a
The appliance starts in the most
recently selected power level if va-
cuuming was stopped previously.
1
Depending on the appliance specifications
