Bosch Serie|4 BGS2U2030 - Инструкция по эксплуатации - Страница 46

46

Cleaning & 

m

aintenance

E

m

ptying the du

s

t container

Fig. 

20

In order to achieve the best possible vacuuming re -
sults, the dust container should be emptied after ever y 
use or, at the latest, when dust in the dust container 
has reached the marking at any point.

!

 Caution

   The dust container can only be removed when the 

appliance is in a horizontal position. Therefore, 
place the appliance on the floor to unlock the re -
lease button.

Fig. 

21

a) 

Remove the dust container from the appliance by 
pulling it upwards out of the cover.

b) 

Press on the upper catch to unlock the lid of the dust 
container and empty the dust container. 

c) 

Check the fluff filter and rinse it under running wa-
ter, if necessar y. Allow to dr y before putting it back 
in the dust container. Close and lock the lid.

d) 

Inser t the dust container into the appliance.

Maintaining the du

s

t

-

collection 

s

y

s

te

m

*

Your appliance is equipped with a Sensor Control indi-
cator. This function constantly monitors whether your 
vacuum cleaner is working at its optimum power level. 

Fig.

22*

Fig. 

22*

The indicator (blue ring) flashes red when the filter in 
the dust container needs to be cleaned. The appliance 
is automatically adjusted to the lowest power level.

Cleaning the filter in the du

s

t container

Switch off the appliance.

Fig. 

23

a) 

Open the bottom plate of the dust container by 
pulling on the lower catch.

b) 

Fold out the filter car tridge with foam filter.

c) 

Remove the foam filter from the bottom plate of the 
dust container. 

d) 

Tapping out the filter is all that is required to be 
able to stop the suction process. 

e) 

Then clean the foam filter under running water.  
Alternatively, the filter can be cleaned in the 
washing machine at ma x. 3 0 °C using a gentle pro -
gramme and the lowest spin speed.  

TIP: 

 To protect the filter, place them in a laundr y 
bag.

f) 

Allow the foam filter to dr y completely for at least 24 
hours and then place the filter back in the bottom 
plate of the dust container.

g) 

Close and lock the bottom plate.

* Dependent on model 

Maintaining the exhau

s

t filter

The exhaust filter is designed so that it does not need 
to be replaced, provided the appliance is used as inten-
ded in the household.

To ensure that the vacuum cleaner is working at its op -
timum power level, the exhaust filter should be rinsed 
out after one year. The filtering action of the filter re -
mains intact, even if the filter sur face becomes disco-
loured.

Fig. 

24*

a) 

Open the top cover by pressing on both sides of the 
catch and remove it upwards.

b) 

Unlock the exhaust filter and remove it from the ap-
pliance.

c) 

Tap out the exhaust filter and rinse it under running 
water. 

 Alternatively, the unit can be cleaned in a washing 
machine at ma x. 3 0 °C using a gentle programme 
and the lowest spin speed.  

TIP: 

 To protect the other items in the machine, 
place the filter unit in a laundr y bag.

d) 

Once the exhaust filter has dried completely (for at 
least 24 hours), put it back into the appliance and 
lock it in place.

>

= Put the top cover back on the appliance so that it 

'clicks' audibly into place.

Cleaning in

s

truction

s

Always switch off the vacuum cleaner and disconnect 
the power cord from the mains before cleaning the va-
cuum cleaner. The vacuum cleaner and plastic acces-
sories can be cleaned with an ordinar y plastic cleaner.

!

 Caution: 
   Do not u

s

e abra

s

ive 

m

aterial

s

, gla

ss-

cleaning 

agent

s

 or all

-

purpo

s

e cleaning product

s

. Never i

m -

m

er

s

e the vacuu

m

 cleaner in water.

Subject to technical modifications.