Bosch BGS 32000 - Инструкция по эксплуатации - Страница 40

39

Cleaning a washable HEPA ilter

The HEPA ilter with the "washable" imprint is designed 
so that it does not need to be replaced, provided the 
appliance is used as intended in the household.
To ensure that the vacuum cleaner is working at its op-
timum power level, the exhaust ilter should be rinsed 
out after one year. The iltering action of the ilter re-
mains intact, even if the ilter surface becomes disco-
loured.

Fig. 

26*

a) 

Open the lid of the exhaust ilter by pushing and 
pulling on the locking tab.

b) 

Unlock the HEPA ilter and remove it from the ap-
pliance.

c) 

Tap out the ilter unit and rinse it under running wa-
ter. 

   Alternatively, the unit can be cleaned in a washing 

machine at max. 30 °C using a gentle programme 
and the lowest spin speed.  

TIP:

  To protect other laundr y items, put the ilter 

unit into a laundr y bag.

d) 

Once the HEPA ilter has dried completely (at least 
24 hours), insert it back into the appliance and lock 
it in place.

>

= Close the exhaust ilter lid. In doing so, push the 

lock bar upwards until it audibly clicks into place.

Replacing the HEPA ilter

(only for appliances without a washable HEPA ilter) 
To ensure that the vacuum cleaner can work at its op-
timum power level, the HEPA ilter should be replaced 
after one year.

Fig. 

27*

a) 

Open the lid of the exhaust ilter by pushing and 
pulling on the locking tab.

b) 

Unlock the HEPA ilter and remove it from the ap-
pliance.

c) 

Dispose of the old HEPA ilter with your household 
waste.

d) 

Insert the new HEPA ilter into the appliance and 
lock it in place.

>

= Close the exhaust ilter lid. In doing so, push the 

lock bar upwards until it audibly clicks into place.

Micro ilter

Cleaning the micro ilter

The micro ilter is designed so that it does not need to 
be replaced, provided the appliance is used as inten-
ded in the household.
To ensure that the vacuum cleaner is working at its op-
timum power level, the exhaust ilter should be rinsed 
out after one year. The iltering action of the ilter re-
mains intact, even if the ilter surface becomes disco-
loured.

Fig. 

28*

a) 

Open the lid of the exhaust ilter by pushing and 
pulling on the locking tab.

b) 

Pull the locking tab to unlock the ilter unit with foam 
ilter and microilter and remove it from the appli-
ance.

c) 

Remove the foam ilter and microilter from the ilter 
frame.

d) 

Rinse the foam ilter and micro ilter under run-
ning water. Alternatively, they can be cleaned 
in the washing machine at max. 30 °C using a 
gentle programme and the lowest spin speed. 

TIP:

  To protect other laundr y items, put the unit into 

a laundr y bag.

e) 

Once the foam ilter and microilter have dried com-
pletely (at least 24 hours), insert them back into the 
ilter frame.

f) 

Insert the ilter unit in the appliance and ensure that 
the locking tabs audibly click into place.

g) 

Close the exhaust ilter lid. In doing so, push the lock 
bar upwards until it audibly clicks into place.

Cleaning instructions

Always switch off the vacuum cleaner and disconnect 
the power cord from the mains before cleaning the va-
cuum cleaner. The vacuum cleaner and plastic acces-
sories can be cleaned with an ordinar y plastic cleaner.

!

 Caution: 
  

Do not use abrasive materials, glass-cleaning 
agents or all-purpose cleaning products. Never im-
merse the vacuum cleaner in water.

Subject to technical modiications.

* Dependent on model