Пылесос Bosch BGS 32000 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

38
Fig.
19*
a)
Telescopic tube without accessor y connection:
To release the connection, turn the handle slightly
and pull it out of the telescopic tool.
b)
Telescopic tube with accessor y connection:
To release the connection, press the locking collar
on the telescopic tube and and pull out the handle.
Fig.
20*
a)
Nozzle without accessor y connection:
To release the connection, turn the telescopic tube
slightly and pull it out of the loor nozzle.
b)
Nozzle with accessor y connection:
To release the connection, press the locking collar
and pull the telescopic tube out of the loor nozzle.
Cleaning and care
Emptying the dust container
Fig.
21
In order to achieve the best possible vacuuming re-
sults, the dust container should be emptied after ever y
use or, at the latest, when dust in the dust container
has reached the marking at any point.
!
Caution
The dust container can only be removed when the
appliance is in a horizontal position. Therefore,
place the appliance on the loor to unlock the re-
lease button.
Fig.
22
a)
Press the release button and pull the dust container
out of the appliance using the handle.
b)
Remove the lid from the dust container and empty
the dust container.
c)
Put the lid back on the dust container.
d)
Remove any dirt which may have been lodged under-
neath the container ejector opening.
e)
Insert the dust container in the appliance, so that it
'clicks' audibly into place.
Maintaining the dust separation system
Your appliance is equipped with a Sensor Control indi-
cator. This function constantly monitors whether your
vacuum cleaner is working at its optimum power level.
Fig.
23
In normal operation
Fig.
23
The indicator (blue ring) lashes red when the foam il-
ter needs to be cleaned. The appliance is automatically
adjusted to the lowest power level.
Cleaning the foam ilter
Switch off the appliance.
Fig.
24
a)
Open the lid of the foam ilter by pulling on the lo-
cking lever.
b)
Remove the ilter cartridge with foam ilter using the
tab.
Remove the foam ilter from the ilter cartridge and
tap out both parts.
c)
If they are ver y dirty, the foam ilter and ilter cart-
ridge should be cleaned under running water.
Alternatively, the unit can be cleaned in the
washing machine at max. 30 °C using a gentle pro-
gramme and the lowest spin speed.
TIP:
To protect other laundr y items, put the ilter
unit into a laundr y bag.
d)
Allow the foam ilter and ilter cartridge to dr y com-
pletely (at least 24 hours) and then reinsert the foam
ilter into the ilter cartridge.
e)
Insert the ilter cartridge with foam ilter back into
the appliance. Close the lid of the foam ilter.
!
Caution
The lid will only close if a ilter has been inserted.
In the event of a fault
The Sensor Control indicator also lashes after the
foam ilter has been cleaned:
Removing a blockage from the dust separation unit
Fig.
25
•
Switch off the appliance.
a)
Hold the appliance lid by the recessed handle and
open it.
b)
Unlock the cover by turning it anti-clockwise, and
remove it from the appliance.
>
= Remove the blockage from the collecting unit.
c)
Put the cover back on and lock it in place by turning
it clockwise.
>
= Close the appliance lid.
If the Sensor Control indicator continues to lash red,
check whether the nozzle, suction pipe or lexible hose
are blocked. This can also trigger the Sensor Control
indicator.
Exhaust ilter care
Depending on the model, your appliance is equipped
with either a HEPA ilter
Fig.
26
or a micro ilter
Fig.
28
.
Depending on the model, your appliance has additional
sound insulation behind the HEPA or micro ilter. This
does not have to be cleaned..
HEPA ilter
You can determine with which HEPA ilter your appli-
ance is equipped by looking at the imprint on the ilter
frame next to the reference number:
•
"washable"
– the ilter can be washed.
•
No additional imprint
– the ilter must be replaced.
* Dependent on model
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)