Bosch BGS 21833 - Инструкция по эксплуатации - Страница 40

39

Maintaining the dust-collection system

Your appliance is equipped with a Sensor Control indi-
cator. This function constantly monitors whether your 
vacuum cleaner is working at its optimum power level. 

Fig.

20

Fig. 

20

The indicator (blue ring) flashes red when the filter in 
the dust container needs to be cleaned. The appliance 
is automatically adjusted to the lowest power level.

Cleaning the filter in the dust container

Switch off the appliance.

Fig. 

21

a) Open the bottom plate of the dust container by 

pulling on the lower catch.

b) Fold out the filter cartridge with foam filter and 

fleece filter.

c) Remove the foam filter and the fleece filter from the 

bottom plate of the dust container. 

d) Tapping out both parts is all that is required to be 

able to stop the suction process. 

e) Then clean the foam filter and the fleece filter under 

running water.  
Alternatively, the two filters can be cleaned in the 
washing machine at max. 30 °C using a gentle pro-
gramme and the lowest spin speed.  
TIP:  To protect the filters, place them in a laundr y 

bag.

f)  Allow the foam filter and the fleece filter to dr y com-

pletely for at least 24 hours and then place both fil-
ters back in the bottom plate of the dust container.

g) Close and lock the bottom plate.

Maintaining the exhaust filter

The exhaust filter is designed so that it does not need 
to be replaced, provided the appliance is used as inten-
ded in the household.
To ensure that the vacuum cleaner is working at its op-
timum power level, the exhaust filter should be rinsed 
out after one year. The filtering action of the filter re-
mains intact, even if the filter surface becomes disco-
loured.

Fig. 

22*

a) Open the top cover by pressing on both sides of the 

catch and remove it upwards.

b) Unlock the exhaust filter and remove it from the ap-

pliance.

c) Tap out the exhaust filter and rinse it under running 

water. 

   Alternatively, the unit can be cleaned in a washing 

machine at max. 30 °C using a gentle programme 
and the lowest spin speed.  
TIP:  To protect the other items in the machine, 

place the filter unit in a laundr y bag.

d) Once the exhaust filter has dried completely (for at 

least 24 hours), put it back into the appliance and 
lock it in place.

=>

= Put the top cover back on the appliance so that it 

'clicks' audibly into place.

* Dependent on model 

Cleaning instructions

Always switch off the vacuum cleaner and disconnect 
the power cord from the mains before cleaning the va-
cuum cleaner. The vacuum cleaner and plastic acces-
sories can be cleaned with an ordinar y plastic cleaner.

!

 Caution: 

Do not use abrasive materials, glass-cleaning 

agents or all-purpose cleaning products. Never im-

merse the vacuum cleaner in water.

Subject to technical modifications.