Bort BSS-1500-C - Инструкция по эксплуатации - Страница 22

22

GB

1 .  BORT GLOBAL LIMITED offers the 2-year warranty from the date of 

sale for all its products . Professional and commercial tools are not cov-

ered by the warranty . Repair is only available for a fee in this case .

2 .  Non-commercial use of the tools imposes limitations on the dura-

tion of its operation and restricts the intended usage to household 

purposes only . The continuous operating time should not exceed 40 

hours . In addition, 10-15 minute breaks are to be made after every 15 

minutes of continuous operation . Ignoring this condition when using 

the tools is a violation of the good operating practice (this provision 

does not apply to pumps, generators, chargers and similar equipment) . 

Subject to the above mentioned condition, the service life of the tools 

is 5 years .

When you purchase a tool, a warranty card is issued (fields with a date 

of sale, model, and serial number are mandatory, other fields can also 

be completed) . Please keep the card together with the sales receipt 

during the entire warranty period for presentation at the service cen-

tre .

Electric tools are only accepted for warranty repairs when assembled 

with all removable devices and their fastening elements (bus bars, saw 

blades, chains, knives, trimmer heads, injectors, sprockets, bolts, nuts, 

and mounting flanges) in working condition .

3 .  The following malfunctions are eliminated free of charge during 

the warranty period:

•  Damage to the instrument, caused by the use of low-quality mate-

rials

•  Assembly defects due to the fault of the manufacturer .

4 .  The warranty does not cover:

•  Malfunctions of the tools caused by the failure to comply with the 

operating instructions .

•  Mechanical damage (cracks, chips, mechanical damage to power 

cords, mechanical damage to the enclosure, etc .), damage caused 

by exposure to aggressive environments and high temperatures, 

damage induced by the ingress of liquids or foreign matter into 

ventilation grids of the electric tools, as well as damage due to im-

proper storage (corrosion of metal parts, etc .) .

•  Tools with defects which were caused by an overload (simultane-

ous failure of the rotor and stator), improper use (usage of blunt, 

unsuitable, unbalanced, or improperly chosen replacement devic-

es), lack of maintenance or care, and use of the tools for purposes 

other than the intended purpose (for example, for processing of 

materials for which the tool is not intended, etc .), as well as by the 

instability of electric power supply, exceeding the standards set by 

EN 61000-3-2, EN 61000-3-3 . Among others, undeniable signs of an 

overload include: changes in appearance, deformation or melting 

of parts and components of the product, darkening or charring of 

wire insulation under high temperatures .

•  Wear parts and materials (carbon brushes, belts, rubber gaskets, 

seals, guards, platforms, bus bars, gears, bearings, hubs, coil heat-

ers, pulleys, rollers, rods, lock buttons, etc .), components (gears, 

shafts, bearings, rods, rollers, etc .) subject to deterioration due to 

lubrication wear-out, as well as replacement devices (drill chucks, 

SDS cartridges, platforms, collets, bus bars, flexible shafts, batter-

ies, battery chargers, etc .) and supplies (knives, saws, abrasives, saw 

blades, drill bits, drills, lubrication, etc .), except in cases of mechani-

cal damage of the above mentioned products due to failures of the 

electric tool which are covered by this warranty .

•  Natural wear of the tool, its parts and components (wearing out of 

the resource, severe internal or external contamination, wearing 

out of the lubrication) .

•  Tools that were unsealed or repaired during the warranty period by 

persons or organizations who are not legally authorized to perform 

these activities .

•  Tools with removed, erased, worn out or changed serial numbers, 

including cases when the data of the electric tool does not match 

the data of the warranty card .

•  Preventive maintenance of the electric tools, for example, cleaning, 

washing, lubrication .

5 .  Do not operate electric tools exhibiting failure symptoms (high 

arcing, smell of burning, increased noise, severe vibration, uneven 

rotation, loss of power) . Do not use the electric tools if there is any 

mechanical damage to the power cord (cracks, chips, tears, binds), AC 

plug, or the enclosure of the tool .

6 .  During the warranty period, faulty parts and components of the 

instrument are repaired or replaced free of charge . The Service Centre 

reserves the right to decide whether such parts and components are to 

be replaced or repaired .

If a failure or malfunction is recognized by BORT GLOBAL LIMITED as a 

warranty case, then it can be removed according to our own choice by 

repair or replacement of the defective tool . Replaced tools and parts 

become the property of the Service Centre of BORT GLOBAL LIMITED .

7 .  Guidelines for the preventive maintenance of electric tools:

Regular preventive maintenance (cleaning, washing, relubrication of 

bearings and gearbox, replacement of fast wearing parts) is recom-

mended for the tools . Maintenance ensures perfect operation of the 

electric tool during its entire service life cycle . The frequency of preven-

tive maintenance at rated load is determined according to the natural 

wear of carbon brushes . Maintenance work is charged according to the 

price list of the service centre . Any failures covered by the warranty and 

detected in the course of maintenance are repaired free of charge . War-

ranted failures, which are detected by the diagnostics, are eliminated 

as agreed by the parties according to the routine procedure .

Preventive maintenance does not extend the duration of the warranty 

period .

Other claims, except for the above mentioned right for free remedial 

measures, are not covered by this warranty .

8 .  This warranty does not affect other legal consumer rights granted 

by the applicable laws .

* Depending on the model .