Philips SRU9400 - Инструкция по эксплуатации - Страница 7

7

ENGLISH

Adjusting the Display Setting

When you use the remote control, the display switches on.
After 6 seconds, it switches off again.
You can change this time out to one of the following options:

1

Access the 

Set-up

menu and press 

.

The numbers 1 to 4 appear.

2

Select the desired display 

time out

:

1

= 3 seconds;

2

= 6 seconds;

3

= 9 seconds;

4

= 12 seconds.

The 

Display

key blinks twice to indicate that the new setting is stored and

the 

Set-up

menu reappears.

Note

The display time out has an impact on the lifetime of the batteries: the

longer the display stays on, the faster the batteries will drain.

Using the Remote Control

Selecting a Device

You can select a device that you have installed on the remote control with
the 

Mode

key:

• The 

Device indicator

lights up.

• The touch screen keys for the selected device appear.
• The hard keys operate the selected device.

Using Touch Screen Keys and Hard Keys

The most frequently used functions of your devices are covered in the touch
screen keys and hard keys.
Only the functions for the selected device appear on the touch screen. You
can access other device functions with the 

Page 2

key at the bottom of the

touch screen.

Using Macros

This remote control can contain up to 4 different macros.

The macros on the remote control are accessible via

.

This key always appears on page 1 of the touch
screen keys, no matter which device you are operating.

1

Press 

to access the programmed macros.

The numbers 1 to 4 appear on the touch screen.

2

Press the number of the macro that you want to execute.
The macro is executed and the 

Device indicator

of the last selected

device lights up.

SRU9400_IFU_EU_v10.qxd  03-08-2006  10:53  Pagina 7