Пульты Philips SRU9400 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
6
Copying Keys
If you want to use a cer tain device-function on this remote control for
another device, you can
copy
that function, by copying the key. For example,
when the volume of your devices (DVD, TV, VCR) is controlled through an
amplifier, you can copy the volume functions of the amplifier-page to the
DVD-page.
1
Access the
Set-up
menu and press
.
Page 1
of the last selected device appears on the touch screen.
2
Press the
source
key of which you want to copy the function.
This can be any key, except Page 1, Page 2, Setup and Mode.
3
Select the device to which you want to copy the function of the source key
with the
Mode
key.
Page 1 of the selected device appears on the touch screen.
4
Press the
destination
key to which you want to copy the source key.
If the SRU9400 successfully copied the key, the
Copy
key blinks twice and
the
Set-up
menu reappears.
-or-
If the SRU9400 did not copy the key, the
Copy
key blinks once and the
Set-up
menu reappears.
Programming Macros
You can program up to 4 macros for operating your devices.
What is a macro?
A macro is
a sequence of key presses
you can program. For example,
for watching a DVD you would normally have to:
• Turn on the TV;
• Turn on the DVD;
• Turn on the surround sound system;
• Select the right input on your TV and surround sound system;
• Press the Play button to star t the DVD.
With a macro, the remote control executes all these steps with
just one press
.
You can access the macros at all times by pressing
and selecting the
number of the macro. For more information on accessing macros, refer to
the chapter
‘Using Macros’
on
page 7
.
To program a macro:
1
Access the
Set-up
menu and press
.
The numbers 1 to 4 appear.
2
Select the
number
under which you want to store the macro.
If there is already a macro under this number, it will be overwritten.
The last selected device appears on the touch screen.
3
Press the
key sequence
that makes up the macro.
Notes
You can program
up to 12 steps
in a macro. The macro is
automatically stored when you tr y to program a 13th step, and the Set-up
menu reappears.
You can access other keys of the selected device with the
Page 2
key, or you
can select a different device with the
Mode
key.
4
Press the
OK
key to end the macro.
The
Macro
key blinks twice, and the last accessed page of the device
appears on the touch screen.
SRU9400_IFU_EU_v10.qxd 03-08-2006 10:53 Pagina 6
