Philips SRU9400 - Инструкция по эксплуатации - Страница 4

4

Placing the Batteries in the Remote Control

1

Press the battery cover at the back of the remote control inwards and
slide it in the direction of the arrow.

2

Place the three L06 or AA type alkaline batteries into the battery
compartment, as shown.

3

Slide the cover back on and click it firmly into place.
After a few moments, the first page of the TV touch screen keys appears.

Replacing Batteries

When the batteries are almost empty, the 

Battery Low

icon appears.

Please replace the batteries with new L06 or AA type alkaline batteries and
follow the local regulations for disposal of the empty batteries.

Setting Up the Remote Control

Installing Your  Devices

To operate a non-Philips device with this remote control, you need to enter
the brand-specific set-up code for that device. You can find a list of set-up
codes at the back of these Instructions for Use.

1 

Use the 

Mode

key to select the device that you want to operate.

The 

Device indicator

lights up.

2

Press and hold 

for 3 seconds.

The 

Set-up

menu appears.

3

Press in 

the 

Set-up

menu.

A numeric pad appears.

4

Look up the brand of your device and the
corresponding 

4-digit set-up codes

at the back of

these Instructions for Use.

5

Enter the first 

4-digit set-up code

on the numeric

pad.
If the IR-code set is activated, the 

Code

key blinks

twice. The last accessed page of the device appears on
the touch screen.
-or-
If the IR-code set is not activated, the 

Code

key blinks once.

Check the set-up code and try entering it again.

6

Test if the keys work with your device.
If the device is not responding to the SRU9400, repeat the instructions
from step 2 onwards, and try entering the next set-up code that is listed
with the brand of your device.

Repeat instructions 1 to 6 for each device that you want to operate.
You can select a different device with the 

Mode

key.

SRU9400_IFU_EU_v10.qxd  03-08-2006  10:53  Pagina 4