Пульты Philips SRU7140 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
User Manual
English
9
1
Place both remote controls on a flat surface (like a coffee
table) and aim them head-to-head with about 30 mm in
between. You may need to adjust the height of one of the
remote controls to achieve this.
2
Press
SELECT
to select the desired device mode (TV, DVD,
STB or AMP).
–
The device mode indicator lights up in the selector window.
3
Press and hold
SETUP
until the device mode indicator blinks
and then remains lit, then release the key.
4
Press
LEARN
.
–
The device mode indicator blinks once, then remains lit.
5
Press the key you wish to learn a new function to (target key).
E.g.
(Standby).
For additional (shifted) functions, first press
SHIFT
, then press
the function key. See ‘Using the
SHIFT
key’.
6
Press and hold the key you wish to copy on the original
remote control (learn key, e.g. POWER) until the device mode
indicator blinks once and then remains lit.
–
If there is a learning problem, the indicator blinks for
3 seconds and then remains lit.
If this happens, repeat steps 5 to 6.
7
Repeat steps 5 to 6 for other functions from the selected
device you wish to learn to this remote control.
8
Press and release
SETUP
when all desired functions are
learned. Code learning is now complete.
9
Repeat above steps for other devices you wish your remote
control to learn from.
Clearing all learned functions for a device
mode
1
Press
SELECT
to select the device mode (TV, DVD, STB or
AMP) of which you wish to clear all learned functions.
–
The device mode indicator lights up in the selector window.
2
Press and hold
SETUP
until the device mode indicator blinks
and then remains lit, then release the key.
3
Press and release
LEARN
twice.
–
The device mode indicator blinks.
4
Press and release digit key
1
.
–
The device mode indicator turns off and all learned functions
for this mode are now cleared from the remote control
memor y.
30 mm
SRU7140_10 03-07-2007 09:53 Pagina 9
