Пульты Philips SRU7140 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
User Manual
English
7
Code Search
If your device does not respond after you have tried all the codes
for your brand, or if your brand is not listed, tr y searching for your
code using code search. Code Search star ts from the currently
stored code.
Automatic Code Search
The remote control will automatically search for the right code for
your device.
1
Manually turn on the device.
2
Press
SELECT
to select the desired device mode (TV, DVD,
STB or AMP).
–
The device mode indicator lights up in the selector window.
3
Press and hold
SETUP
until the device mode indicator blinks
and then remains lit, then release the key.
4
Press and release
PROG +
once.
–
The remote control now star ts emitting all known Program +
commands to your device one by one. The device mode
indicator turns off with each command sent.
•
If the device does not use a
PROG+
key then the
(Standby) key can be used instead.
•
If you accidentally go past the code required, press
PROG -
to
go back until the device responds.
5
Press and release
(Mute) to install the code.
–
When all the codes for a specific brand have been searched
the device mode indicator blinks rapidly for 3-seconds.
Programming with Brand Search
Allows you to search for a code for a specific brand in the code
librar y for a par ticular manufacturer.
•
You can find the table of the code librar y on page 2.
1
Manually turn on the device.
2
Press
SELECT
to select the desired device mode (TV, DVD,
STB or AMP).
–
The device mode indicator lights up in the selector window.
3
Press and hold
SETUP
until the device mode indicator blinks
and then remains lit, then release the key.
4
Press the numeric key (1-6) corresponding to the desired
brand (see table).
–
Pressing ‘0’ performs Code Search as described before.
5
Press and release
PROG +
(or
2
(in case of VCR) or
)
repeatedly until the device responds.
–
The device mode indicator turns off with each command sent.
•
If you accidentally go past the code required, press
PROG -
to
go back until the device responds.
6
Press and release
(Mute) to install the code.
–
When all the codes for a specific brand have been searched
the device mode indicator blinks rapidly for 3-seconds.
Programming combo device codes
Some combo devices (e.g. TV/VCR, TV/DVD, DVD/VCR, etc.)
require you to set up two different source selection keys to
control both par ts of the combo device. For example, if you have
a TV/DVD combo, you might need to set up one code under the
TV key to control the TV and a separate code under the DVD key
to control the DVD.
SRU7140_10 03-07-2007 09:53 Pagina 7
