Elenberg DVDP-2448 - Инструкция по эксплуатации - Страница 89

TROUBLESHOOTING

SYMPTOM

WHAT TO CHECK 

The player cannot play.

-If disc is loaded in. 
-If disc is loaded upside down.
-If disc is dirty or warped.
-If the player’s region code is the same as region code 
of DVD disc. 
-If water condensation has occurred. 
-If it occurs, take out disc and leave the player on for at 
least hours.

There is no sound.

-If system connection is correct. 
-If the power of speakers is turned on. 
-If the sound setup of DVD disc is correct. 
-If disc is dirty or warped.
-If it occurs, clean it or press it.

There is no picture.

-If TV is turned on and is in correct video mode. 
-If system connection is correct.

Poor AV performance. 

-If disc is dirty, warped or damaged.

Cannot continue to play and
play a section repeatedly.

-If it is in A-B repeat status. 

-If it is true, press A-B button to cancel it. 

-If disc is dirty or damaged. 

-If it is true, clean it or skip the section.

The remote control does not
work.

-If there are obstructions between the remote control
and the player.
-If the remote control is pointing at the player.
-If batteries are inserted or the polarity is correct. 
-If batteries are weak.
-If it is true, replace them.

Howling(feedback)occurs.

move the microphone away from TV or speakers. 
lower the volume of player, TV and amplifier.

Others:

Static or other external interfere may cause the abnormity of the player. In this 

circumstance, unplug the power-supply cord from the outlet and plug it in again to reset

the player so that the normal operation will be resumed. If you are still having problems,

then please disconnect the power and consult your service cPlay or a qualified technician.

89