Elenberg DVDP-2448 - Инструкция по эксплуатации - Страница 60

System CONNECTIONS

S-Video connection setting 

If your TV has an S-Video jack, plug a S-Video cable into the S-Video out jack on the DVD

Player and the other end to the S-Video In jack on your TV. There is no need to do the

setting in the setup menu. 

Y/Cb/Cr video connection setting 

If a display device with Y/Cb/Cr jacks is connected, then you should connect the jacks with

these Y/Cb/Cr cables:

Press the

Ǐ

VIDEO

ǐ

button to shift the video output to be YUV interlace signal output. Shift

the TV input mode to Y/Cb/Cr.

Y/Pb/Pr video connection setting 

If a display device with Y/Pb/Pr jacks is connected, then you should connect the jacks with

these Y/Pb/Pr cables:

- Press the

Ǐ

VIDEO

ǐ

button to shift the video output to YUV Progressive signal. Then shift 

the TV input to the relevant mode. 

- Press the

Ǐ

VIDEO

ǐ

button, the screen will be black when shifting from interlace to

progressive  mode, repress  the

Ǐ

VIDEO

ǐ

, It can work normally.

VGA connection setting

If the DVD Player’s video output is in interlaced mode. Select ‘VGA’ in the
‘COMPONENT’ menu, then press the Play button. 
Restart the player, then video out is shifted to VGA output automatically.
If the DVD Player’s video output is Y Pb Pr. Select ‘VGA’ in the
‘COMPONENT’ menu, then press the Play button to shift to VGA output. 

SCART connection setting

If the DVD Player’s video output is in interlaced mode. Select ‘VGA’ in the
‘COMPONENT’ menu, then press the Play button.
Restart the player, then video out is shifted to VGA output automatically.
If the DVD Player’s video output is Y Pb Pr. Select ‘VGA’ in the ‘COMPONENT’
menu, then press the Play button to shift to VGA output. 

60