Smeg PLA4645X7 - Инструкция по эксплуатации - Страница 9

User instructions

TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT

•

Always try to run the dishwasher

 fully loaded

.

•

Do not wash the dishes in running water.

•

Use the washing program that is 

most appropriate

 for each type of

load.

•

Do not carry out any preliminary rinsing.

•

If available, connect the dishwasher to a hot water supply up to
60°C.

•

When possible, 

skip the drying cycle

 by leaving the door open

when the washing cycle is complete; the air and the residual heat
will dry the dishes perfectly.

TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT
THE ENVIRONMENT

The phosphates contained in dishwasher detergents are harmful to the
environment. To avoid using excessive amounts of detergent and to
save on electricity, observe the following:

•

separate 

the more delicate items from dishes that are more

resistant to aggressive detergents and high temperatures;

•

do not pour 

 the detergent directly on the dishes.

REMOVING THE DISHES

At the end of the washing program, wait at least 

20 minutes 

before

removing the dishes, to allow them to cool down. To prevent any water
droplets on the upper basket from falling on the dishes in the lower
basket, it is 

advisable 

to unload the lower basket first, and then the

upper basket.

3/1 OPTION BUTTON

By pressing the button 

(3)

 you activate the "

3/1

" option, confirmed when

the relative light comes on. This option has been studied for the use of
dishwashing powder or tablets with integrated substances in place of
regenerating salt or rinse-aid known on the market as “3 in 1” or “triple
action” products; in this case the dishwasher will use the product in an
optimal way avoiding salt and rinse-aid consumption, which could
already be found in the dishwasher.

Note:

  When selecting the "

3/1

" button, it is normal that the salt and

rinse-aid lights remain on, if their containers are empty.