Smeg PLA4645X7 - Инструкция по эксплуатации - Страница 6

User instructions

PROGRAMMING

In this dishwasher model all the programming operations are possible
only with closed door. With open door, on the 

DISPLAY (8)

 will appear

the symbols 

--

 and the 

PILOT LIGHT PROGRAMS (7)

 remains out.

SELECTION PROGRAM

The program selection is possible
through the relative buttons 

(2)

.

By pressing the relative button of desired program (see table) it will lid up
the relative pilot light to confirm that the operation did occurred on the

DISPLAY (8)

 will appear a program duration forecasting (“

h.mm

”).

START PROGRAM

At this point, in order to start the machine, it is only enough to press the

START/STOP (5)

 for some seconds until the writtin “

Time to end

” start

to flash and confirmation “beep” is heard. From this moment the cycle
dration on the 

DISPLAY (8)

 starts to decrease.

This phase, that updates itself during the cycle, is “indicative” since it is
influenced by the washing conditions such as dishwasher type and
quantity, entry temperature etc. For this reason it is normal to see the
updating during a program (increment and decrease of minutes)
specially in the passage from one phase to the other (for example, from
washing to rinse).

END PROGRAM

The end of the program is indicated by a short signal acoustic and from
the “

End

” visual notification on 

DISPLAY (8)

. By pressing one of the

buttons, the “

End

” visual signal will vanish from the display and the

dishwasher is ready to continue a new cycle, the same thing happens
when closing or opening the door or by switching on-off the machine.