Kuppersberg GS 6020 - Инструкция по эксплуатации - Страница 9

9

ENGLISH

TECHNICAL PASSPORT

Dishwasher

A. Remove the lower basket and 

then unscrew and remove the cap from 
the salt container. 

1

B. If you are fi lling the container for 

the fi rst time, fi ll 2/3 of its volume with 

water (around 500ml). 

2

C. Place the end of the funnel 

(supplied) into the hole and introduce 
about 1,2kg of salt. It is normal for a 
small amount of water to come out of 
the salt container.

D. Carefully screw the cap back on.
E. Usually, the salt warning light will 

be off in 2-6 days after the salt container 

is fi lled with salt.

NOTE: 

1. 

The salt container must be refi lled 

when the salt warning light in the 
control panel comes on. Though 

the salt container is fi lled enough, 

the indicator light may not black 
out before the salt fully dissolve. If 
there is no salt warning light in the 
control panel (for some models), 
you can judge when to load the salt 
into the softener by the cycles that 
the dishwasher had run (see the 
following schema).

2.  If there are spills of the salt, a Pre-

rinse program could be run to wipe 
them out.

C. Fill the Rinse Aid Dispenser

Function of Rinse Aid

Rinse aid is automatically added 

during the last rinse, ensuring thorough 
rinsing, spot and streak free drying.

Attention!

Only use branded rinse aid for 

dishwasher.  Never  fi ll  the  rinse  aid 

dispenser with any other substances 

(e.g. dishwasher cleaning agent, liquid 

detergent). This would damage the 

appliance.

When to Refi ll the Rinse Aid 

Dispenser

If there is no rinse-aid warning light 

on the control panel, you can judge the 

amount of rinse-aid by the color of the 

optical level indicator «D» located next 

to the cap. When the rinse-aid container 

is full the whole indicator will be dark 

.As the rinse aid diminishes, the size 

of the dark dot decreases. You should 

never let the rinse aid get below 1/4 

full.

As the rinse aid diminishes, the size 

of the black dot on the rinse aid level 

indicator changes, as illustrated below.

 Full

 3/4 full
 1/2 full

  1/4  full  -  Should  refi ll  to  eliminate 

spotting

 Empty

D (Rinse-Aid 

indicator)