Kuppersberg GL 6033 - Инструкция по эксплуатации - Страница 8

8

Technical passporT

english

dishwasher

Â

Switch the dishwasher on using the ON/

OFF button.

Â

Switch it off using the ON/OFF button.

Â

Press button P three times - a beep will be 

heard.

Â

Switch it on using the ON/OFF button.

Â

The current selection level number and 

rinse aid indicator light fl ash.

Â

Press button P to select the level of rinse 

aid quantity to be supplied.

Â

Switch it off using the ON/OFF button

Setting is complete! If the rinse aid level is 

set to ZERO (ECO), no rinse aid will be supplied.

The LOW RINSE AID indicator light will not 

be lit if you run out of rinse aid. A maximum of 

4 levels can be set according to the dishwasher 

model. The factory setting is for a medium level.

Â

If you see bluish streaks on the dishes, set 

a low number (1-2).

Â

If there are drops of water or limescale 

marks on the dishes, set a high number (3-4)

D E T E RG E N T

Only use detergent which has been 

specifi cally designed for dishwashers.

DO NOT USE washing up liquid.

Using excessive detergent may result in 

foam residues remaining in the machine after 

the cycle has ended.

To achieve the best washing and drying 

results, the combined use of detergent, rinse 

aid liquid and refi ned salt is required.

We recommend using detergents that do 

not contain phosphates or chlorine, as these 

products are harmful to the environment.

F I L L I N G T H E  D E T E RG E N T  D I S P E N S E R

Good washing results also depend on 

the correct amount of detergent being used. 

Exceeding the stated amount does not result 

in a more effective wash and increases 

environmental pollution.

The  amount  can  be  adjusted  to  the  soil 

level. In the case of normally soiled items, use 

approximately either 35g (powder detergent) 

or 35ml (liquid detergent) and additional tea 

spoon of detergent directly inside the tub. If 

tablets are used, one tablet will be enough.

If the crockery is only lightly soiled or if it has 

been rinsed with water before being placed in 

the dishwasher, reduce the amount of detergent 

used accordingly (minimum 25 g/ml) e.g. skip 

the powder/gel putted inside the tub.

For good washing results also follow the 

instructions shown on the detergent box.

For further questions please ask the 

detergent producers.

To open the detergent dispenser use the 

opening device A.

Introduce the detergent into the dry dispenser 

B only.

Place the amount of detergent for pre-

washing directly inside the tub.

Â

When measuring out the detergent refer 

to the (see PROGRAMS TABLE) to add the 

proper quantity. Compartment B comprises a 

level showing the maximum quantity of liquid 

or powder detergent that can be added to each 

cycle.

Â

Remove detergent residues from the 

edges of the dispenser and close the cover until 

it clicks.

Â

Close the lid of the detergent dispenser by 

pulling it up until the closing device is secured 

in place.

The detergent dispenser automatically opens 

up at the right time according to the program.

If all-in-one detergents are used, we 

recommend using the TABLET button, because 

it adjusts the program so that the best washing 

and drying results are always achieved.