Elenberg DW-600 - Инструкция по эксплуатации - Страница 23

PROBLEM

POSSIBLE CAUSE

POSSIBLE SOLUTION

Dishwasher will 
not start

1. Dishwasher not 
receiving electrical 
power

Check  electrical  connection  fuse/
circuit breaker

2. Door is unlatched

Close and latch door

3. Dishwasher not level

Level unit

Dishes not clean 1. Improper loading

a)  Arrange  dishes  so  spray  action 
reaches all surfaces.
b) Do not overload dishwasher.

2. Spray arm not 
rotating freely

a)  Check  spray  arm  to  make  sure 
nothing  (i.e.  cutlery)  is  obstructing 
spray arm rotation.
b) Check if filter screen has become 
dislodged and obstructing spray arm 
rotation.

3. Not enough detergent 
and/or    improper 
detergent being used.

a) Use more dishwasher detergent.
b)  Do  not  use  detergent  that  is  hard 
or cracked.
c)  Use  only  a  recommended  
dishwasher detergent.

4. Improperly prepared 
dishes.

Excess  food  soil  and  liquids  should 
be  removed  from  dishes  before 
loading.

5. Water inlet hose 
kinked/bent due to 
improper installation.

Eliminate  kink  or  bend  from  Inlet 
hose.

Chipping 
or breaking 
glassware

Improper loading of 
dishes.

Do  not  overload  dish  rack.    Load 
glasses  on  the  upper  rack  only,  not 
over dish rack pins.  Glasses loaded 
over  dish  rack  pins  are  not  properly 
supported and subject to damage.

Water remains in 
bottom

1. A small amount of 
water (in sump area) is 
normal.

This is necessary to keep the pump 
primed and is drained    automatically 
at the beginning of each cycle.

2. Excessive amount 
of water; cycle not 
completed.

Allow  dishwasher  to  complete  full 
cycle.

Dishwasher 
can’t stop

The draft is too much

Drain  the  water  out  and  clear  the 
filter.

COMMON DISHWASHINg PRObLEMS AND SOLUTIONS