Electrolux ESL 4500LO - Инструкция по эксплуатации - Страница 8

5.1 

Consumption values

Programme 

1)

Water

(l)

Energy

(kWh)

Duration

(min)

P1

9.5

0.789

225

P2

6 - 11

0.5 - 1.2

40 - 140

P3

11 - 13

1.0 - 1.2

130 - 150

P4

8

0.8

30

P5

4

0.1

14

1) 

The pressure and the temperature of the water, the variations of the mains supply, the op-

tions and the quantity of dishes can change the values.

5.2 

Information for test institutes

For all the necessary information for test

performance, send an email to:

info.test@dishwasher-production.com

Write down the product number (PNC)

that is on the rating plate.

6. 

SETTINGS

6.1 

Programme selection mode

and user mode

When the appliance is in programme

selection mode it is possible to set a

programme and to enter the user mode.

In user mode, the following settings

can be changed:

• The level of the water softener

according to the water hardness.

• The activation or the deactivation of the

acoustic signal for end of programme.

• The deactivation of the rinse aid

dispenser when you want to use the

Multitab option without rinse aid.

These settings will be saved until you

change them again.

How to set the programme

selection mode

The appliance is in programme selection

mode when the display shows the

programme number 

P1

.

When you activate the appliance, usually it

is in programme selection mode.

However, if this does not happen, you can

set the programme selection mode in the

following way:
Press and hold 

Reset

 until the appliance

is in programme selection mode.

6.2 

The water softener

The water softener removes minerals from

the water supply, which would have a

detrimental effect on the washing results

and on the appliance.

www.electrolux.com

8