Simfer F66HB45016 - Инструкция по эксплуатации - Страница 11

11

11. 

Make sure that there is no liquid or humidity in 

the outlet where the product plug is installed.

12. 

The rear surface of the oven also heats up when 

the oven is operated. Electrical connections shall not 
touch the rear surface, otherwise the connections may 
be damaged.

13. 

Do not tighten the connecting cables to the oven 

door and do not run them over hot surfaces. If the cord 
melts, this may cause the oven to short circuit and 

even a fire.

14. 

Unplug the unit during installation, maintenance, 

cleaning and repair.

15. 

If the power supply cable is damaged, it must be 

replaced by its manufacturer or authorized technical 

service  or  any  other  personnel  qualified  at  the  same 

level, in order to avoid any dangerous situation.

16.

Make  sure  the  plug  is  inserted  firmly  into  wall 

socket to avoid sparks.

17. 

Do not use steam cleaners for cleaning the appliance, 

otherwise electric shock may occur.

18.

 An omnipolar switch capable to disconnect 

power supply is required for installation. Disconnection 
from power supply shall be provided with a switch or 

an  integrated  fuse  installed  on  fixed  power  supply 

according to building code.

19.

 Appliance is equipped with a 

type ‘’Y’’

 cord cable.