Bertazzoni PRO100 5I MFE D AR T - Инструкция по эксплуатации - Страница 16

16 

necessary for the heating process. 
Vessels made from the following materials are not suitable: 
glass; 
porcelain; 
pottery; 
steel, aluminium or copper without magnetic bottom; 
To check that a pan is suitable, simply place a magnet close to its bottom: 
if the magnet is attracted, the pan is suitable for induction cooking. If no magnet is to 
hand, put a little water in the pan, place it on a cooking zone and switch it on. If the 
symbol appears on the display instead of the power, the pan is not suitable. 
The pans used for cooking must have certain minimum diameters to ensure 
satisfactory operation. 
Pans larger than the cooking zones can also be used, but it is important to ensure 
that the bottom of the pan does not touch other cooking zones, and that it is always 
centred over the perimeter of the cooking zone (Fig.18A-18B). 

                                            Fig 18A                                           Fig 18B                                                    

Use only vessels specially designed for induction cooking, with thick, completely flat 
bottom; if these are not available, the pans used must not have crowned (concave or 
convex) bottom (Fig.19).  

                                         Fig 19  

Pan present device 

Each cooking zone is equipped with a "pan present" device, which ensures that   
cooking cannot start unless a suitable pan is present on the cooking zone and 
properly positioned. 
If the user attempts to switch on the cooking zone with the pan not positioned 
properly or with a pan which is not of suitable material, a few seconds after the zone 
is switched on the 

symbol will appear to warn the user that an error has been 

made. 

Residual heat 

Each cooking zone is equipped with a device which warns of residual heat. After any 
cooking zone is switched off, a flashing ‘H’ may appear on the display. This warns 
that the cooking zone concerned is stili very hot. 
 

Locking-out the hob  

When not in use, the hob can be "locked out" to prevent children from accidentally 
switching it on.  

With the cooking zones off, turn the knobs of zones 1 and 2 to the left 
simultaneously until ‘’L’’ appear on the power  
display and then release the knobs.  
To deactivate it, repeat the same procedure: the cooking zone displays will stop 
displaying the ‘’L’’, indicating that the cooking zone lock-out function has been 
deactivated.