Плита Bertazzoni MAS95I2ENET - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
26
Ovens:
Always allow the oven interior to cool before cleaning.
Interior oven door enamel and glass
Never use sharp implements to remove stains as this could scratch the surface. The
door enamel and glass surfaces can be cleaned with a soft cloth, warm water and
washing-up liquid. Polish dry with an microfibre cloth. For more stubborn marks and
to protect the glass surface use a good quality glass cleaner/conditioner, following
the manufacturer's instructions.
Please do not use steam cleaners on the oven interiors as this may damage
electronic parts.
Ensure the cooker is cold before cleaning.
Removal of the oven door (without soft close hinges)
To allow full access to the inside of the oven for thorough cleaning, the oven door
can be removed.
-
Fully open the door and insert the pins supplied into each hinge.
-
While closing the door to an angle of about 30°, lift and pull so that the door
leaves the mounting. Leave pins in place.
The rivet needs to be put into the hinge before you can remove the door.
Removal of the oven door (with soft close hinges )
-
Close the door to an angle of about 30°
-
Lift, than close the door to an angle of about 70°
-
Pull so that the door leaves the mounting.
The rivet needs to be put into the hinge before you can remove the door.
Removal of the inner glass door panes
To assist with cleaning, the inner glass door panes are removable.
-
Open the door fully and insert the pms supplied into each hinge to secure the
door in an open position.
- Locate the stainless steel clips at the base of the door.
- Slide the clips towards the centre of the door.
- Holding the glass, lift slightly and pull towards the oven, the glass pane will
release.
- The central glass pane is revealed. This can be cleaned in situ or removed.
- To remove the central pane, remove the 4 screws and brackets.
- It is important to remember when replacing the central pane that the rubber
spacing must be replaced first.
- When replacing the inner pane, ensure the glass is print side up and the widest
border is nearest the cooker.
It is not necessary to remove the door in order to clean the glass panes.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
