Worx SAW WX527 - Инструкция по эксплуатации - Страница 8

Lithium-Ion Cordless Circular Saw EN

8

other condition that may affect the power 

tool’s operation. If damaged, have the 

power tool repaired before use. 

Many 

accidents are caused by poorly maintained power 

tools. 

f)   Keep cutting tools sharp and clean. 

Properly 

maintained cutting tools with sharp cutting edges 

are less likely to bind and are easier to control. 

g)  Use the power tool, accessories and 

tool bits etc. in accordance with these 

instructions, taking into account the 

working conditions and the work to be 

performed. 

Use of the power tool for operations 

different from those intended could result in a 

hazardous situation. 

h)  Keep handles and grasping surfaces dry, 

clean and free from oil and grease. 

Slippery 

handles and grasping surfaces do not allow 

for safe handling and control of the tool in 

unexpected situations. 

5)  Battery tool use and care 

a)  Recharge only with the charger specified by 

the manufacturer. 

A charger that is suitable for 

one type of battery pack may create a risk of fire 

when used with another battery pack. 

b)  Use power tools only with specifically 

designated battery packs.

 Use of any other 

battery packs may create a risk of injury and fire.

c)  When battery pack is not in use, keep it 

away from other metal objects, like paper 

clips, coins, keys, nails, screws or other 

small metal objects, that can make a 

connection from one terminal to another. 

Shorting the battery terminals together may 

cause burns or a fire.

d)  Under abusive conditions, liquid may be 

ejected from the battery; avoid contact. 

If contact accidentally occurs, flush with 

water. If liquid contacts eyes, additionally 

seek medical help. 

Liquid ejected from the 

battery may cause irritation or burns.

e)  Do not use a battery pack or tool that is 

damaged or modified. 

Damaged or modified 

batteries may exhibit unpredictable behaviour 

resulting in fire, explosion or risk of injury. 

f)   Do not expose a battery pack or tool to fire 

or excessive temperature. 

Exposure to fire or 

temperature above 130 °C  may cause explosion. 

g)  Follow all charging instructions and 

do not charge the battery pack or tool 

outside the temperature range specified 

in the instructions. 

Charging improperly or at 

temperatures outside the specified range may 

damage the battery and increase the risk of fire. 

6)  Service 

a)  Have your power tool serviced by a 

qualified repair person using only identical 

replacement parts. 

This will ensure that the 

safety of the power tool is maintained. 

b)  Never service damaged battery packs. 

Service of battery packs should only be performed 

by the manufacturer or authorized service 

providers.

SAFETY WARNINGS FOR 

ALL SAWS

a)

DANGER: Keep hands away from 

cutting area and the blade.

If both hands 

are holding the saw, they cannot be cut by 

the blade.

b)

Do not reach underneath the workpiece. 

The 

guard cannot protect you from the blade below 

the workpiece.

c) 

Adjust the cutting depth to the thickness 

of the workpiece.

Less than a full tooth of 

the blade teeth should be visible below the 

workpiece.

d)

Never hold piece being cut in your hands 

or across your leg.

Secure the workpiece to 

a stable platform. It is important to support the 

work properly to minimize body exposure, blade 

binding, or loss of control.

e)

Hold the power tool by insulated gripping 

surfaces only, when performing an 

operation where the cutting tool may 

contact hidden wiring or its own cord.

Contact with a “live” wire will also make exposed 

metal parts of the power tool “live” and could 

give the operator an electric shock.

f)

When ripping always use a rip fence or 

straight edge guide.

This improves the 

accuracy of cut and reduces the chance of blade 

binding.

g)

Always use blades with correct size and 

shape (diamond versus round) of arbour 

holes.

Blades that do not match the mounting 

hardware of the saw will run eccentrically, 

causing loss of control.

h)   Never use damaged or incorrect blade 

washers or bolt. 

The blade washers and 

bolt were specially designed for your saw, for 

optimum performance and safety of operation.

FURTHER SAFETY 

INSTRUCTIONS FOR ALL 

SAWS

KICKBACK CAUSES AND RELATED WARNINGS

-   Kickback is a sudden reaction to a pinched, bound 

or misaligned saw blade, causing an uncontrolled 

saw to lift up and out of the workpiece toward the 

operator.

-   When the blade is pinched or bound tightly by the 

kerf closing down, the blade stalls and the motor 

reaction drives the unit rapidly back toward the 

operator.

-   If the blade becomes twisted or misaligned in the 

cut, the teeth at the back edge of the blade can dig 

into the top surface of the wood causing the blade 

to climb out of the kerf and jump back toward the 

operator.

Kickback is the result of saw misuse and/or incorrect